Viewing all customer Discussions for:

23-241 60" Sliding Mirror Door Bottom Track

I need a top and bottom 60 inch white track for these mirror closet doors.

i need a top roller and bottom track for door # 10427932 246605

Hello, I'm looking for the correct tracks for our mirrored closet doors. The closet spaces are 60" in length. We need both top and bottom tracks! Thank you in advance for your help!

Hello,It's hard to be 100% sure, but your track looks a lot like our 23-241 60" and 23-242 72" track. Take a look at the dimensions and detailed images on our product page and see if you agree. Thank you!

This seems to be very old Double rollers for it the grooves Need 120? total in white

I need a replacement track for a Stanley Monarch sliding door. Length 72", Model 50519982 or 240823? The rollers are in good shape so I don't to replace them at this time. The number stamped in the roller is 4011.

Need upper n lower tracks, rollers for top n bottom. 60" width.

this is a rather old track. a renovation was completed and the track was "misplaced". the track guide is 2.5" wide and the wheels track at 1.5" apart. I thought that a photo of the wheel guide would help.

I am looking for a upper and lower track for 50726992 240803

Familiar story ... doors were in my house when I bought it, bUT no tracks. The closet where I intend to use these doors requires a 60" track/ guide. I've attached 3 photos; Top roller with manufacturers label ... Bottom hardware with a sliding adjustment ... A sketch of a simple alternate bottom gu ... (cont.)

We are looking to replace the bottom tracks of two sets of mirrored sliding doors 60 in wide as they've gotten rusty as a result of a flood in our basement. The sticker on the back of the doors have these identifying codes along with your company information when it was situated in New Britain, ... (cont.)

I have by pass mirror doors. I need to replace the bottom track. This is 60 inch long. can you tell me what track I need. The one I have is white metal Thank you Nancy

I have a closet opening of 10' 10" and I need to replace my track. What is the best way to place 2 pieces of your track (23-242) down without having the door catch at the seam?

I have a closet door with a rusted floor track. This door has rollers that hang from the top track; at the bottom, there are rectangular plastic nylon(?) tongues that snap into the grooves of the bottom track, similar to the convex rollers, but not wheels. The rack looks just like your 23-240 belo ... (cont.)

I'm fixing my Stanley bypass doors using your top and bottom tracks along with the older version of the 23-222B rollers. Could you provide some instructions about how to frame and install bypass doors using this setup?

we need a 47" 58" and a 70" 4inch wide track

Hello, We are looking for 2 white 60 inch rails as in the attached images Do you carry them? Thanks, Doron

Hi: I just purchased a condo and see that the white tracks on 2 sets of mirror closet doors with white runners are rusted. The doors are still in good shape so only need to replace two 5' wide runners. The sticker on the backside of doors show the model #64564-001. If possible, I prefer bru ... (cont.)

I am needing the bottom track for Stanley doors, total width 3 3/4", height 1/2" x 60" long. This is a dual track, bottom roller support.

Your part #23-243 is an 8' long bottom track. I need one 9' long. Is this available or should I piece 2 short ones together?