Viewing all customer Discussions for:

23-242 72" Sliding Mirror Door Bottom Track

Installed a 8' door set about 15 years ago. Over the past few years the lower track has begun to curl upward away from the floor. This has occurred slowly and began to affect the ability of the doors (one in particular) to slide easily. At this point, one door cannot be opened without brute force ... (cont.)

How do u adjust the sliding mirrored doors?? When they close, there is a gap at the top??

Our track is starting to roll and our doors are skipping track. Don't know any model or anything. its measure is 137"

Hello can anyone tell me how I can find these floor rails for a Stanley Monarch closet doors? Larry

Hi, I went on your website but couldn't find the tracks for my mirror closet doors. The doors were purchase from Home Depot in 2002. Please find the attached photos. Hopefully it shows enough detail! Thank you.

We just purchased an apartment with an interior closet which has 3 mirrored glass sliding glass doors. The doors do not slide and we want to replace the upper and lower tracks. The door opening is approximately 7 -8 feet and there are tracks on the top and bottom which appear to be worn. Each do ... (cont.)

Does Product Code: 23-242 come in gold?

What can be used to cut tracking 23-243? The tracking is just a little bit longer.

I need to know if can get the top and bottom rail for my closet doors, the top rail is 3 3/4 in wide and 1 1/2 deep, the bottom rail is also 3/34 wide, both rails need to be 72" in length, and white in color.

I need to replace the bottom tracks on our closet sliding mirror doors. The tracks measure 94" x 2.5", and 59" x 2.5". Do you have the tracks as shown on the attached photos?

I am looking for a bottom track similar to the one in the pics. The dimensions are approx. 6 lf in length x 3 1/2" wide with approx. 1 5/8" between the groves for the roller hardware. I'm hoping you have a product that will work as a replacement.

Please see pictures. I have 2 sliding door closets. The tracks are badly bent. Also one door is missing. The track is about 3" wide and 71 inches long. Do you have it? The door is 36"x94". Do you have that? Please quote.

We are using 2 (two) ea. 36"x80"x1-3/8" pine doors for sliding closet doors. They will not be pocket doors, but slide behing the wall to the interior of the closet. Will the 23-242 work for this application? Please let me know. Thanks, Rodney

I have bottom roller number 00-5024 I looking to find the bottom track 5" can you tell me if the Sliding Mirror Door Bottom Track Product Code: 23-242 will work and the cost plus shrimping to zip 33442 thanks *I bought this doors in home depot few year ago, and they do not have this trac ... (cont.)

Hello, We need to replace this track for 2 closets. Can you help me find the right track to use? Thank You, Carole

Hello, we need help identifying the attached hardware. It is approximately 3" in height, 1 5/8" wide and the wheel is approx 7/8" in diameter (convex). Only idenfifying marks are an 'F' on one side and a label that states 'To adjust, loosen screws half turn' on the other side. We purchased our ... (cont.)

I need a (2) 72" bottom tracks for convex wheels to replace the one in the attached photos. This is for sliding mirror doors. Tracks are about 1 5/8" on center. Wheel track width at about 3/16". Please let me know the part number for the correct bottom track in white so I can order. Thanks, ... (cont.)

I appear to have Roller# 23-041 on my sliding mirrors and the track is a mess and I want to replace it. The length is approx 72" and the width is 3 3/4". The current color is white but I'm open to other colors.

I had a tile floor installed and the installers damaged the bottom track and it appears the rollers are damaged and/or being pinched in the damaged track. The track is 72" long by 4" wide. I believe I need a new track and bottom rollers for the doors. This unit is a 2 door mirror closet door. ... (cont.)

track needs to be replace and plastic wheels covers. Also g