Viewing all customer Discussions for:

33-087 8-32 x 3/8" Phillips Truss MS Zinc

I don't see any marking. The wheel is 3/4" diameter. The doors are older and heavy. Should I replace the entire system, or do you have replacement parts for this?

I'm trying to find 2 replacement parts to a shower door. The shower door is from a company called Royal Guard Bath

Hi there! I'm trying to find the part pictures which attaches to the top of our sliding screen door. The wheel is 3/4". I have not found any markings on the door itself or the parts. Appreciate your time! Best, Emil

Roller fell off,need replacement for kitchen cabinets. I have six drawers using the same slide,should have spare parts! Are the rollers available? Roller Dim 1/4"thick X 15/16 Dia ball bering. Cabinet Mounting is 22.7/8" Drawer Mount is 19.3/4" Actual Dimensions this is a 20" Drawer ... (cont.)

I looked through your catalog, your stock roller is 1"() x 0.25" (7mm). I need any roller mechanism with a 22-23mm outer diameter and 8.5-10mm thickness/width. I attached a photo of what I have with the current dimensions noted in the photo itself. My cabinet door will not stay in the track with t ... (cont.)

Original 1972 sliding wardrobe doors on a 5' track. They slide into a narrow place on the inside frame. I have tried to reconfigure with a newer pair of rollers, but it's not really working out. Thank you

I need 8 bearings to replace the broken one in the photo above. The roller is 7/8 inch in dameter, the nylon roller is 1/4 inch thick, The entire bearing is .455 inches thick and the screw I believe is an M4. The screw is .475 inches in total length, .16 inces in diameter and the threaded portion is ... (cont.)

Hi Looking for help!I am looking for Century Sliding Shower Doors Top Rollers.Century HAIDA Tempered Glass ANSI Z97.1.1984 16CFR 1201 CAT II SGCC 2934 1/4Pictures attached. It will be a great help if you let me know what types of top rollers ( wheels ) will be the right fitRegards Roy ... (cont.)

Hello, I have a sliding screen patio door I am trying to save and unfortunately the bottom wheels are gone and I have no way to compare. I attached a picture of the bottom of the door to hopefully get some help on identifying which roller/wheel assembly I need. The door is a bit larger than the stan ... (cont.)

Hi, seeking assist for IDing these RPL hardware please :)

Looking for something similar

needs

Hello, First THANK YOU(!) for this service as there seems to be a million door component parts and parts manufacturers. As noted in the Subject, the parts noted in the attached pictures are for a sliding wardrobe / closet door. Note this door has a full width and height mirror and I mention this d ... (cont.)

Need a set of replacement for these

I am looking for this style of replacement rollers.

Top rollers and bottom holders needed

Dear Expertise, I need to replace my shower door roller (old), I don't know what part need to order, the roller diameter is : 3/4", also there is a cross shaped screw, the screw head diameter is : 3/8". thank you very much for your help. Let me know what else info you need. Please see the atta ... (cont.)

No numbers or markings on rollers. Any help is greatly appreciated. Thank you.

Hello. I have patio screen doors from 1963 that need replacement. The part is 1" 3/16th wide Almost 2 inches high including roller. I've included a photo. Any idea what would work? Thank you.

Looking to replace rollers or assy cannot find in 5/8 od