Viewing all customer Discussions for:

70-219 5 Pack, Snap-On Plunger Pin Assemblies

Most of our window screen plunger pins are not functioning. They seem to be frozen. The pins will not pull back or push forward. I tried spraying lubricant in the screen hole. The screens are about 15 years old but in good condition other than the plunger pins. How can you remove broken plunger pin ... (cont.)

Hi. I'm looking for replacement caps that go on the plungers that have been breaking off of most of my windows.

Hi - which pins would work here?

Looking for replacement plastic pull pins on super seal casement screen

I want to replace the countertop weight shoes on my windows the old ones are just cracking and breaking and refusing to slide. I assume I can just replace the shoe not the complete counter balance?I also have the screens which need to have their pins replaced also I’m sending picture of the it ... (cont.)

I have several missing or broken pins that hold my window screens in place. They retract to insert the screen, then engage a hole in the window frame when released.

Hi, I have Superseal Series 1650 and 1850 windows ans screens from 2002. I need these little pins that hold the screens to the window panes. Not sure how to take them out to show you. Feels like a spring us behind cap.

Hi, Trying to identify the correct replacement part for Marvin Integrity Screen Pins in the year 2012. As per your posts could be 70-008 or 70-009? Or a different number altogether? Please advise. Muki

Screen window plunger opening 1/4" and 1/8"

looking for replacement plunger pins for caradco window acreens in white

I replaced my rotten window trim and have a slightly larger gap than before. My plungers on the screen don't quite reach like they should. Do you sell an extended length plunger? Thanks Charles

Good afternoon, Looking for these window frame inset retainer pins. Thank you for any assistance you may be able to provide. Best, Jim

I need some screen plungers for marvin integrity screen windows. There approximately 22 yrs old

Hello - I'm trying to determine which replacement pin I need for my window screen. Please see if you can find me your pin that would work on my screens. As you can see the measurements are:Width if frame material: 3/4"Distance from end of pin to bottom of cap looks like: 1.0"O.D. of plunger tip: 3/1 ... (cont.)

they are plastic with a spring load to attach to window (Anderson screen)

White plastic screen pin for Milguard double hung window screens

Hello, I was wondering what the best replacement is for the spring loaded pins. The holes are 11/64th in diameter. Thanks.

Hi...I need to replace some broken screen plunger assemblies. The total plunger length is 1 5/8" long. The diameter of the plunger that protrudes from the screen frame is 3/16 and approx 3/8"long. Appears that somehow a spring is contained I am unable to determine who made the window. ... (cont.)

Was recommended this part and having trouble with the install

Hi, is it possible to obtain a pin similar to the 70-219 but in aluminum with a black cap?