Viewing all customer Discussions for:

26-122 Vent Latch

Hello this part mounds into a hole on the side of the window and acid as a stop unless are you lever is pushed in which will then allow the window to open all the way the inside diameter as shown in the picture is approximately inch and three-quarter's please let me know if you have anything like th ... (cont.)

American Craftsman (Home Depot )vinyl DH upper sash vent lock. Approx. 1 3/4 " x 1/4" . Searching for replacement/ repair part

Looking for window hardware parts, picture of window and broken parts attached. Windows were installed originally in 1994.

Attached are pictures showing a flip-out security stop in place and the slot where one is missing. The slot dimensions are 1/4" by 1 7/8". Can you supply a similar mechanism? I would be interested in purchasing 10 of such. I need four but believe it would be wise to have a few more on hand. Tha ... (cont.)

Could you help with finding this style of window stop?Thank youBrian

Part is in upper window on each side blocking window from lowering completely. I need 8 of these.

Hello I'm Frank Are these available from you? It goes on the top sash pivots out, so it restricts the lower sash from opening more than 4 inches? I'm looking for 10 to 12.Thx Frank

This came out of my vinyl window, there is a number on the side that says PAT. # 4,923,230. I wanted to see if you carried this product because I have a few I need to replace that are broken including the one in the photo. Thanks in advance.

I am looking for window sash vent stop. Opening is 3/16" Wide X 1" 1/16" Tall

Looking to replace these on our current PlyGem windows.

Hi, and thanks for this. I have windows that slide up and down. There are small plastic "blocks" that are designed to lift/tilt out a small amount to block the window from sliding up (open) more than about 6 inches or so. Unfortunately, I opened them too vigorously one day and just snapped off th ... (cont.)

Champion vinyl window security latch. Patent #4923230. Patent #5248174

what is the size of the vent latch 26 - 122?

Would you let me know the height and the depth of this latch ?

The only identifier, after removing the hardware, is #5.5 37 inchs PAT 5232208 on the coil. I need all the proper hardware to replace all coil balances on both sides of the window, the pivot shoes, and coil supports. not sure if this setup is considered single coil, double coil, or more. Note that ... (cont.)

I am trying to replace a coil balance in my window. The company that produced it was called LBL windows in the Pacific Northwest and is no longer in business. I have taken some photos which show the attachment at the top and the mechanism with 2 coils. I haven't yet taken it out because there is no ... (cont.)

Looking for the part in photo

Hi my name is Tom and I'm locking to repair my United Windows 4100 series White.I'm locking for some vent lath and locks, annex is some pictures.Also I have a casement window who need a hardware to close that windows, annex is some picture.let me know if you have and the price.Thanks ... (cont.)

I found out that Anderson is no longer affiliated with Silverline windows. Silverline said that they don't supply parts to individuals and to contact you. Can you please let me know if you supply this part and the cost per part.

Apparently we didn't check for the functionality of one of the basement windows after taking possession of brand new house and after 3 years we discovered these part are broken.