Viewing all customer Discussions for:

26-122 Vent Latch

The only identifier, after removing the hardware, is #5.5 37 inchs PAT 5232208 on the coil. I need all the proper hardware to replace all coil balances on both sides of the window, the pivot shoes, and coil supports. not sure if this setup is considered single coil, double coil, or more. Note that ... (cont.)

I am trying to replace a coil balance in my window. The company that produced it was called LBL windows in the Pacific Northwest and is no longer in business. I have taken some photos which show the attachment at the top and the mechanism with 2 coils. I haven't yet taken it out because there is no ... (cont.)

Looking for the part in photo

Hi my name is Tom and I'm locking to repair my United Windows 4100 series White.I'm locking for some vent lath and locks, annex is some pictures.Also I have a casement window who need a hardware to close that windows, annex is some picture.let me know if you have and the price.Thanks ... (cont.)

I found out that Anderson is no longer affiliated with Silverline windows. Silverline said that they don't supply parts to individuals and to contact you. Can you please let me know if you supply this part and the cost per part.

Apparently we didn't check for the functionality of one of the basement windows after taking possession of brand new house and after 3 years we discovered these part are broken.

Hello I am in need of 5 sets of "tilt latches" and a few window stops as shown in uploaded photos. One photo shows the size of the opening too. Size of opening in the frame is 2.5 x .5 Thank you!

I have a bunch of windows where this lock won't spring out. Any idea on if/how I can replace them?

The only identifiers I can make out on the springs are #4.5 35" on one spring and P 5232208 on another. I dont know if they should be all the same. The springs are both 1/2" wide and the shoes are 1 1/4" wide by 1 1/2# long. There are no markings on the pivot bars. If this makes sense to you guys, I ... (cont.)

I need to replace the "fresh air stop" or "window vent stop" on a Milgard Tuscany series slider window. I ordered stops from Swisco, but the current stop will not come out of the window.

I need the window vent latch replacement.

Need 8 stops to replace mine. They measure 2" tall x 3/8" wide x 9/16" deep. They are white.

Plygem window stop replacement part number so that I can order.

A couple of these on double hung windows have broken when we have open the window forgetting that they were deployed. Do you have some thing like this?

Hello Swisco, I will be ordering American Craftsman parts for my windows and door slider 6' can You tell me the correct slidder wheels forthe 6' American Craftsman Slidders? I will be ordering also American Craftsman Double hung parts Pivot pins, Coil Balance Springs 16.7lbs window weight and Ti ... (cont.)

I need a window sash pivot matching the one posted, one sash lock matching the one posted and two shoes matching those posted. Thank you. I also need guidance on installing the shoes and getting the old ones out.

Can I get replacement child locks?

Hello - I recently had two of these auto resetting vent stoppers break on my single hung United Windows (I don't know the series since my builder never provided that to me), but I'm unable to find replacements anywhere. I called United and they said they don't directly sell parts and that I should v ... (cont.)

I had several double hung windows professionally installed. Three of these windows (1 bathroom, 1 bedroom and 1 living room window that tilt for cleaning)slam down and refuse to remain open. Per your video, I believe I need Pivot lock shoes for these vinyl windows. I have included pictures and sp ... (cont.)

Hi- I'm looking for a tilt & vent stop latch that was in Anderson Silverline single hung window installed in 2018. As you can see from the photo, tilt latch's handle broke so I need a replacement. Tilt latch top plate dimension 2 5/8" by 11/16". Vent stop latch has total height of ~2 inch. Let me ... (cont.)