Viewing all customer Discussions for:

23-176 Mirror Door Roller Assembly, 1-1/2" dia.

I need a 68" length of threshold that will accommodate the mirror door roller in the attached photo.

I am looking for 4 replacements of these that I have uploaded. this roller is for a sliding closet glass door. Any idea of which model?

Looking for a part number, and two order six of these

I need 4 replacements for my closet doors. I have attached pictures and the model reads as follows: Del Mar Eng. 448-3

Please identify and sell us the correct sliding door roller assembly. Width - 17mm height - 40mm depth - 70mm wheel (plastic, but a metal one would be great) dimension - 36mm Thanks!

The needed roller assembly is for one of the three triple glass doors for a bedroom closet. Each glass door has two of these rollers (one on each side). The roller had a lot of thread binding it completely. After removing the thread, and cleaning it, the roller rotates but not as freely as the ot ... (cont.)

I'm looking for replacement rollers for my marriage sliding closet door. All the measurements are pretty close together so I don't quite know which one to order. As you can see I took a picture of both sides of the part that I need. I wasn't able to provide a picture with it already installed becaus ... (cont.)

I need help identifing a part. I have purxhase 2 patio hardware single wheel assemblies. However these assemlies are for my mirrored sliding glass doors. Ill provide pic. My wheels outer assembly is 1 1/2 in long, 5/8 wide, the heigth was 1 1/8 /tall. Amd from the top to the screw hole is 1 1_2 ... (cont.)

Looking for replacement part for ansi mgr code cv-1 series 600 ANSI/aama. Hs-r20, hs-c40 mst 12060/806, 101-88 Providing you with info on window sticker Home has 39 of this type of window. Many of the window wheels needs to be replaced.

The glass sliding door has this info on it. Guardian Industries, Reedley, CA 16CFR1201CAT2 V97.1.1984

Would first like to identify and second how to remove and replace.

I have some Monarch sliding glass doors that have broken wheels. I hope you can help.

I am looking for 4 replacement wheels for my large mirrored closet doors. Do you have this one in the pictures I sent to you. Please help.

I am looking for replacement parts for mirror closet door guides roller and top and bottom track. The only numbers I found are on the roller- Del Mar 448-3.The nylon roller is 1 1/4 in. Dia.

Do you have the Nylon for the 81-250 product?

Miles image0.jpegimage3.jpegRoller= 1"image4.jpegWidth at flair = 1/2"image1.jpegTotal height = 1"image2.jpegTotal length= 2 1/8"If at all possible, I'd like the lower track as well.It is 56 1/2" x 1 7/8 as shown below.image5.jpegThanks

Need roller for this. Ours is missing for glass sliding door

Hi, I have a 30+ year old bypass door track for mirrored closet doors. The doors are 8' tall. The track is 130" long and I think the replacement track would be 2 of the 23-272 tracks joined together. The wheel assemblies I am unsure of. I think they may be 23-092 or 23-232S. I don't think nylon whee ... (cont.)

I'm trying to replace rollers of 3x closets with these rollers types.

I can't find these any where do you have them 1 1/2