Viewing all customer Discussions for:

55-189 Snap-in Glazing Bead

My house is 15 years old and all the snap in plastic glazing is cracking and breaking from the years of heat and weather. The windows are Guardian manufactured in Corsicana, TX. It looks like the code on the window is:SGCC-1248 I/8U 3MMBS 6206: 198116 CFR 1201 11CAN 2-12.1-M79A-006-03Can you recom ... (cont.)

Will the snap-in glazing bead work on a Norco window?

Hi. Looking for bead to replace current ones. Bead is 1/2" x 3/8", the curved side is 1/2". Any help is appreciated.Thanks, Steve

Need a replacement Glaze.

I think the window were made by champion

Howdy, I am looking to replace this type glazing that was damaged during a hail storm. Thanks, -Charlie Boerne, Texas

I am needing to purchase replacement snap in glazing beads. White Vinyl snap in glazing bead. 1/2 inch on the outside and 5/8 inch on the side that snaps in beside the glass. It has a small ridge near the outside corner (see photo) Any help you can give and prices would be appreciated so that I can ... (cont.)

It was installed on a residential window that has no marking and I didn't see any on the vinyl beading either. It is white and I need 80 linear ft of it. The house went through a hail storm. Please contact me ASAP. Thanks in advance!

I need to replace this window trim. It is very similar to your product 55-017-3 except the measurements of my piece are 6/16(9/16) by 7/16 (19/32) Any idea where I can get this size? In bronze. Thanks, kathy

I'm looking for replacement glazing strips for all my windows. Dark color, looks like black. Can you help me select the correct replacement?

Can you please tell me if you have this? I need several thousand feet.

I have attached photos of this window bead, can you help me identify a replacement?

See photos. Do you have anything like this white? Need approx. 2000 ft

I have Alenco single hung windows in a home that was built in 1979. Some of the windows need various parts replaced but I need to be able to remove the broken parts to be able to send you pictures. To do this, I need to be able to remove the lower sash and cannot see how to do this. There are no ... (cont.)

Curved portion of existing glaze is 17/32 inch. Straight portion that snaps into frame is 16/32". Locking lip is spaced 1/8" lower than corner edge. White vinyl glaze is brittle from sun and weather. Champion window frame i is 2002 year built in Perry home in Houston Texas. Please tell me what you s ... (cont.)

I am looking for this snap in window glazing in bronze for an aluminum window. The window is installed in a Mesco metal building and was sold as part of the building kit. The glazing is similar to 55-189 but I am not sure if it will work. Thanks for your help!

The measurement for each side is 1/2 inch. One side (without the tab) is slightly curved. The side with the tab is flat.

I believe this is from a Champion 3050 window

Do you have this product?

I'm needing approximately 10' of snip-in glazing for a MW Window. The window is a wooden double-hung circa 1995.