Viewing all customer Discussions for:

23-272 71" Bottom Concave Roller Track

Hello, It is the correct track, I want to replace the concave rollers with BB. In my photos, pay particular attention to the bottom screw holes; they are offset, unlike your Product Code 23-086 which are in-line. No one seems to have the roller hardware with the offset holes. Not sure about drillin ... (cont.)

We have three mirror closet doors 8 feet high. The track is 10 feet long and has a convex track that takes Cox 21-717, 21-767 concave rollers (6 of them). The present track is badly bowed and rollers have chunks missing on them. We are having difficulty finding anyone to help us. Can you please advi ... (cont.)

Can you please help me find the right track for my closer mirror sliding Door. Bottom track damaged 72 in long.

Need to find new closet door runners that go on carpeting

The rail is nearly 72 inches long and 4 feet wide. It holds two sliding glass mirrored closet doors which bypass each other. Current rail system is bent causing the doors to hang up when trying to operate.

Hi. I'm looking to replace 6 wheels and track for my 3 sliding wardrobe doors. The wheels I have at the moment are cox 21-717. 21-767 and the floor track is a double track approximately 8cm wide by 3m 34cm long. Could you tell me if the 23-070 would be a good replacement and do you sell a double tra ... (cont.)

Hi, Can you suggest what track will work? Is 23-272 a correct option?

sliding mirrored closet doors have a stick on the back that says " Contractors Wardrode #3376481" if that helps to replace these bent up tracks. Thinking the 23-271 in a 72" will work.?? Thank you Debbie

need replacement track, 2-1/2" x 72"

I need to replace the Monarch mirror door track for three pieces, length are 2 for 67.5 inc, 1 for 47. 1/4,inch. Please See attached photo. I think should be model 23-241, but one of them seems like they squeeze it to be narrower. Is the photo show the products should be the same model? ... (cont.)

Hello, I'm hoping to fix my closet. It's has been struggling on the tracks for quite some time and now the mirror has become disconnected at the top of the side and I can't figure out how to get it back together. I may need a new track so I can get this in better operational shape. It's the 71" trac ... (cont.)

Can you tell me what style this is? Mary Anne

I want to make a 72 inch closet have 3 (24 in) mirror doors instead of just 2. It makes it easier to reach the center of the closet. Do you have any bottom and upper track/guides that I can use? I found (3) 2-foot mirror doors that have concave roller's on bottom and standard plastic roller/guides ... (cont.)

Track is mangled. 6 foot closet, mirrored oak trim. All but trsck in great shae. Help!! Also included pics of rollers which are fine.

71" long

To whom it may concern, I need help in procuring a new bottom track for the Monarch Sliding Glass mirrored door. I have attached two photos, one of the track and one of the "wheel" assembly that rides in the track. I will follow this email with a telephone call.

I need a lower closet door track. the track is approximately 3 1/2 inches wide. Two doors slide on it. Im not sure if I need the 23-272 or another model. I can't get the pic. to load onto my portable computer but have pics on phone. Thanks for help. Tony

I am trying to find bottom tracks for my basement closets. I have 3 closets: 1) Closet 1 is 72" long and each of the glass doors I have are 37" high. 2) The 2nd closet is 57" long, and 3) Closet 3 is 68" long. The hardware is all intact on all doors. My basement flooded and the carpet ... (cont.)

I would like to have a price for two 6' long of those tracks, Thank you very much.

I need to replace my roller track with this product. However, the track in my closet is 60 inches. I plan to purchase the 71 inch track and cut it down. Do you have any recommendations on how to perform this so the edge is cleanly cut without deforming the track? Thanks,.