Viewing all customer Discussions for:

23-272 71" Bottom Concave Roller Track

I need two 72? white bottom tracts for mirrored sliding doors made by Monarch Mirror Door Company. My old paperwork says they are model L or V series, if that helps.Thank you.Lisa

the mirror closet door bottom track needs replacement. it looks like some of your parts, the most important thing is the- 4" wide.

We purchased a home that has a Stanley/Monarch bypass mirrored glass closet door system. It is missing (1) upper 48" track. Track is 3 3/8" wide, 1 1/2" deep with 1 1/2" between rails. Toll free number on sticker no longer works; all numbers associated with the door system is at the bottom of the s ... (cont.)

I purchased a home and two closets have mirror sliding doors. Apparently some of the rollers were replaced with convex wheels and the doors easily come off the guides. I found one wheel tat apparently is the original wheel and fits perfectly in the groove and it is a flat and solid nylon wheel. (Ple ... (cont.)

As you can see, this track is in bad shape. The wheels are fine. They are concave. I am thinking 23-272, but I can't tell how big the opening is for the wheels. The door opening is 60"

Do you stock a bottom track like this for glass closet doors? It is 71 " long and 3.5 inches wide. I can cut to fit length of course. If so what is the cost and approximate shipping ? Thanks for your help.

I need to replace the track in the photo. The rollers still seem okay. The track has just gotten so warped in that they have become pinched. It's 70 3/4" long and the roller guides are 1 3/4" apart at their apex. What would be the correct replacement rail?

Have a set of old circa 1991 I believe monarch mirror sliding closet doors. Track is shot and seen better days other than that I cleaned the rollers good and they seem to spin ok. What track would work for this old setup?Also, this has the concave wheels which I would like to replace as well, see at ... (cont.)

I am looking to replace a 72 inch track for sliding mirror closet doors with convex wheels. Thank you, John

Hi,I'm looking for a track and rollers to replace those pictured. The ones I found on your site seem to be too narrow. I'm looking for the space of the rolling part of track to be about 2 in apart.Do you have a track that fits these doors and is 72 inches in length? Thank you, Dan ... (cont.)

We have sliding Closet Doors using N-6630 rollers on a bottom track of approximately 3.5" wide using a grooved roller. I need 2 tracks at 72" long and 2 at 60" long.We have only owned this house for 3 months and do not know the source of the original parts. Do you have the tracks? Jack ... (cont.)

I am looking for the bottom track only and am having trouble just identifying what I have. Attached are pictures of the track as well as the bottom hardware that rides in the track if it helps with identification.The track pictured is 3 15/16" wide.ThanksRich

Hi my name is Jackie, I need a new bottom track for my sliding doot. The weel is Cox 21-717 and 21-767. The track do not have a numbe. All I need is a track

I need to buy a replacement for this bottom track, aprox 4 tracks 2 @ 4ft and 2 @ 70 3/4"

I need the top and bottom of this door ,, the top has to open gaps 1?5/8 And bottom of you Can it?s a two door so whatever that size is .. silver color like we have in pic When you reply can you reply all and if you have questions call my wife

They are already de-installed (we installed new hardwood floors). Here are pictures. The bottom rail is 2 7/8? wife by 72? long. There are no markings. The house was built in 2004 by the builder Taylor Woodrow in Central Florida. I would like the replacement parts in white.

I think I need new track and wheels. they keep jumping the track. rollers may work with new track 23-272. Can I get just a small piece of track to see if it will work? Bruce ps I have a second closet I'm sending in second email.

This rail is 69 7/8 inches long X 2 1/2" Width. What is the cost for a replacement rail? Thank y

Hi! Looking at your products, your bottom concave roller tracks seem to be pretty close to what I need, but the tracks seem to be a bit to close together. My old track has the two tracks nearly 2" apart, as opposed to the 1 21/32" that I see on some of yours. Not sure if that spacing will work, or ... (cont.)

I have an older track and I have trouble opening the closet door all the time. I am looking into getting a new track for it. I have attached what the current one looks like.