Viewing all customer Discussions for:

26-416 Pivot Bar Set, Harvey

i am trying to replace a sash pivot for my older vinyl window. on the pivot it has some writing. pat pend. 1523 1478 and a large R with 1888 next to it. this pivot is a right angle with a small square pivot sticking out of it. two holes on the bottom and one hole on the side of the sash. ... (cont.)

I need two pair of (left and right) sash piviots (like the one in the photo) for the lower sash on older Harvey DH windows. Windows are probably about 20 years old or older.

I need to order a few of these!

Hi, I am looking for pivot bars for Harvey windows from 2002. The bars for the top and bottom sashes are slightly differant and there are lefts and rights. Need 4- bottom lefts, 1- bottom right and 2- top lefts at a min. but would like to get a few extra. Can seen a sketch with diamensions if needed ... (cont.)

Please provide link for the pivot bars & coil springs (7R & 7L) shown in attached photos. The tip has broken off on another window which has the same type of pivot bars. These windows are double pane and they swing to open and I would like to purchase some pivot bars & a set of 7R & ... (cont.)

These are from older style (30- 40 yrs?) windows. property is in Massachusetts (if that's any help) Only stamping inside is R 207 4 (4 is smaller font) Screw holes are 3/4" apart Metal is cheap white metal.

Hi, I have vinyl double hung windows and a couple need pivot bars. I cannot find the manufacturer on the window, just size code. I also don't see it in your parts of pivot bars. Maybe you can find one or two of these for me. Thanks Patricia

Can you help me identify the replacement part for pivot bar mechanism? I included a picture of the lock which shows the brand as tech 2000. I'm only looking for the pivot bar in the first photo .

Hello, I am trying to repair two windows where the shoe was stuck and broke the pivot bar. I thought it was a Harvey window but it is different; the whole bracket at the bottom removes and has the pivot bar riveted in. Any ideas on a replacement part? Thanks Mike

Hi, I am looking for the above pivot bar, Harvey indicates the part number should be 12451- left and 12452-right, part number on the actual pivot bar shown is 2T52. I have these same pivot bars in all of my windows however in one I recently pulled out for cleaning and installation of new weatherstr ... (cont.)

Hi I need help identifying this part. The only marking I see is P/N 1597. Thank you

In need of this pivot bars and pivot shoes

Looking for pivot bar for either a comfort plus or mastic window. Thank you for any help you can give me.

I recently purchased 26-416 for a Harvey window. Apparently, I broke the originals when I tilted the window when it was all the way at the bottom of the track. I replaced the pivot bars and then installed them with the window up about 8? ? however, they twisted again (and almost broke) when I reposi ... (cont.)

This is a pivot bar to a double hung window. Please let me know if you need anything else. Ty T

Looking to find a new balance, and I'm not sure of the type that matches mine. My original does not have any pieces on either end as you can see.

Couldnt find a tag on the window for a model. Only the brand name harvey

Needing 2 (left and right) balancers, and 2 (left and right) sash pivots. Removed what I thought was the sash pivot screw and cannot remove the pivot. The pivot shoe seems wider than the channel? Appreciate any help in advance!! Mike

marking: 1524 1478 C-A 1888 need left and right disregard the aluminum tape

Took these out of the bottom sides of the window where it tilts forward. I need a replacement for the mangled one (the one on the left as your looking at the window from the inside). THANK YOU