Viewing all customer Discussions for:

10-324 24" Shower Sweep With Drip Rail

This door sweeps is 21 years old. No Manufacturer description. About 21" long and has one screw in #1 slide and another short screw in the "2 slide. An inside screw on a small tunnel but want pry off. Don't seem to find anyone that has the right parts. Can you help? Robert

Shower door sweep. The rail is 22 3/4" long and the screws are 1 1/2" from each end.

shower sweep rubber needs replacing - it is squeezed by the part in the install photo - ignore the black rubber - it was a piece I tried to use that was not long enough.

Hello, I need some assistance finding the right drip sweep seal on my glass shower door. I believe it's called the vinyl sweep, needs to be an inch and a half. And the drip set needs to be at least 26 inches long. Thank you!

I need a new shower sweep with drip rail. The measurement is 17 inches wide. The shower door is 18 years old & the sweep is tearing now. I can't get the rubber out so a new one is in order. Can you help. Thank you

Looking for replacement bottom sweep for Unitex 1/4 inch thick shower door. Photos attached.

Hello, Please let me know if you are able to provide replacement sweep, as shown in attached photos Thanks

Hello, I don't know if this Shower was produced by Swisco, but I would be grateful for your help in getting the best available match for Bottom Rubber or Vinyl Sweep-Seal, Door Catch and Replacement Screws. Note: I replaced seal many years ago with generic product ... This time I want to get i ... (cont.)

I've been all over the city of Philadelphia trying to find this rubber to fit the bottom of my shower door. There is no manufacturer name on my shower unit, it's been in my home for at least 10 or more years. I've been to Home Depot, Lowe's and even a plumbing supply place.I saw your ad and wanted t ... (cont.)

My name is Willie. My shower door sweep plastic part is torn up. I would like to replace the gold plated part and the plastic part attached. It has 1/4 inch T plastic attached to the gold plated bar. Do you guys have a replacement part?

I need to replace the rubber strip which seals my Aquaglass glass framed 22 1/2 inch shower door. The metal part is 22" long and it is 1" 3/8" wide

I have a shower glass door69"h x 24"w and frame is OD 1/2"thick ID approx 1/4"With a 1-1/4" Alumin. BorderPlease if you have the parts needed or can direct me to where i can buy parts let me knowThank you

I am not even sure this is the correct description, but in the photo you will see a (formerly) clear strip of plastic that has come off the shower door sweep.I'm assuming I have to replace the entire door sweep but I cant find one of the size it measures.The door itself measures 32". But the sweep ... (cont.)

I have a neo angle shower?I need the sweep which slides under the frame and the screws to stabilize the hinge. I am including Pics of sweep as well as the shower.

Hello, looking for replacement parts. The sliver strip with the black rubber came off of the bottom of shower door. It appears that some kind of adhesive is on the part of the silver strip that came off. Looking to replace the part that came off, silver strip with black rubber swepper. See attach ... (cont.)

I've searched far and wide for a replacement shower door bottom seal (see attached photo) but no luck so far. By any chance do you have this one? I don't have any markings on the shower, shower door, or shower door drip rail. Thanks.

Hello, I have two shower part inquires. Please let me know if you offer the following parts or viable alternatives. 1. Clear Vinyl T Wipe / Sweep Measuring 7/32 x 11/32 x 67 Long. Pic Attached, Framed Shower door seal, channel insert (7/32). 2. Polished Brass, Shower Door Drip edge. Pic Attach ... (cont.)

The shower door is loose at the bottom, what are the replacement parts for the parts shown in the picture? And also what is the shower sweep show I buy for this drip rail? Thanks!

I need new shower door sweep for old shower door. Made by Aquaglass and is 213/8 long and on with no screws. Do you anything I can use?

Hi, My shower door sweep with drip rail 23.25 inches needs replaced. I removed the two screws and the driprail remains permantly attached. Are there any additional screws that need to be removed? When the 24 inch Swisco shower sweep arrives, how do you relace the old one ? My original shower ... (cont.)