Viewing all customer Discussions for:

23-266 Pivot Guide

Top roller for lauan hollow-core bifold closet door (maybe as old as 1960) is so worn out I can't even tell what the roller diameter once was. It once had a spring which is now missing. No brand or number markings on door or hardware. The slot in the track is only 1/2" wide and the inside width o ... (cont.)

Hello! Home has a 3 bifold door setup. Two lefts and one right. Far Left and right doors are operational and have 90 degree bottom pivots. Middle door floor bracket appears to be missing something. Cannot locate a flat bottom pivot on the web. Any help would be appreciated. Tried a flat pivot wit ... (cont.)

Searching for replacement pins for bifold. See attached photo. Screw hole spacing approx 1.5 inch

Hello, l am in need of replacement hardware for these 1980's bi fold doors. Thank you, Julie

Attached is a top pivot bracket that goes into a track. I am guessing these parts are 25 plus years old. I did not see this on your wed site and the pieces my wife had me order were not correct.

Thank you.

I am looking for a part for a wooden Bifold door. The top post that goes in the track. It has a metal bracket with two screws. The white plastic post has a sort of knob on the end of it. It slides in the top track. House is circa 2000,

Hi! I've got a customer with these great, 60's-vintage bifold doors that won't stay on the tracks. They're too heavy and too nice to hang on the big-box garbage. Problem is, I'm not sure where the failure is. What seems to happen is the roll guide falls out at the insertion opening, and then the top ... (cont.)

I have a top pivot bracket on a bi fold door that doesn't hold anymore. The problem that I have is everything that I've bought or found online is 5/8" wide. This house was built in '64, so the pieces that it needs are only 1/2" wide. Any idea where I can get something 1/2" wide? Bending the 5/8" pie ... (cont.)

Spring thing for bifold door

I am trying to replace my bifold track with "Product Code: 23-456 72" Bifold Track" My track has two bifold doors handing from it, each door is about 30 lbs. The old track is 21.3 mm wide inside; the new track is 20.8 mm wide. The Johnson hardware in my old track is too wide to fit into the new tra ... (cont.)

Looking for a replacement for the nylon sleeves for this hardware

I have bifold doors but I have lost the top pinwheel that keeps the door on track along with the spring post. The track width can accommodate a pinhead of about 5/8 inch in diameter. The height of the wheel that is on the other door is about 1/2 inch. Looks like I am also missing the plate that a ... (cont.)

Need help ordering correct parts for closet bifold door track.Old track is on right in photo, new track is on left. Bracket does not fit into either track.Do you have a bracket assembly that would fit onto the old track on right?The old assembly is both metal/plastic and is broken.New brackets purch ... (cont.)

Hello, I am looking to replace this part which holds the top of a set of wood bifold doors. The plastic catch broke. Thank you for any shop you can provide.

Hello. Having trouble finding this hardware to put it back on my bifold doors to put them back up. Tried Menards and Ace hardware and no luck. Thank you for any information you might be able to provide.

I need this part for my door

Hi, Do you sell the bifold door track that is compatible with the 23-266 - Pivot Guide? Thanks, Mike

I'm needing to replace the top post for my wooden bi-fold door the metal mounting portion is 2 inches in length and 5/8 inch in width the post is 3/4 inch in length with a plastic top that is 5/8 inch in diameter

Hello,This is the guide pin hardware from older model bifold closet doors we have. I wish I knew approximate time period and there are no marking of a company anywhere on the closets or hardware. I have searched all over the internet and don't see anything that comes close to the unique design of th ... (cont.)