Viewing all customer Discussions for:

32-343 Face Frame Cabinet Compact Hinge

I need about 15 Melpa 510-356 Hinges. Can you help?

I need to replace the hinges on my medicine cabinet. The original hinges were made by Mepla. The only number stamped on the hinge is "511 356 00 25." The hinge fastens to the door/mirror using 2 countersunk machine screws spaced 1 7/8" apart. The other hinge end has alignment tabs that fit into ... (cont.)

I need a replacement hinge for a medicine cabinet MEPLA 511.356 0025. Do you have anything that resembles this? Thanks, Phillip R

I ordered 32-345 but it made my door a little too short. Should I be using 32-343? Here's a photo of the cabinet with 32-345 installed on the bottom and my original hinge on top, followed by a photo of the original hinge and finally your hinge. I hope you can help me get this fixed before Thank ... (cont.)

Please help me find a replacement for this cabinet hinge. I have sent a sample.

The picture shows a complete unbroken hinge and the broken door side hinge. The door side of the hinge number is 510.353/ 10.00. The mounting holes are 48 or 49 mm apart.The cup is 35 mm. The face frame mount number is 348.253/ 51.02 The overhang for the door is 0.5 inches.

ARISTOCRAFF CABINET HINGE INSIDE OF Swing Part has a 'B' on the right side & 09J with 1/2 OL on the left

Sending a picture of Aristokraft cabinet hinge. I order part 32-345 and is to short.Doesn't fit. The door gap is wide open.

Can't find need to replace

First hinge is for a cabinet door and is 2 5/8 inches. The cabinet doors are traditional doors (not full coverage). The second hinge is for a corner cabinet door and is 5.5 inches long.

How much distance is their between the screw openings on the right side of the hinge or part that fastens to the cabinet for hinge # 32-343? Please advise

Please help me find this hinge

I need to replace a number of the pictured hinges on my cabinets. The number on the hinge, I believe, is "03087.87" The cabinets were installed in 2002 by the first owners of the home. Thank you for your assistance. Dion R

This piece is attached to the cabinet door and is broken. The adjoining part is 348.220.50/00, which seems to be fine. Thanks for any helping finding this part. Cabinet door is 28 and 1/4 " tall by 18" wide.

I also have Homecrest cabinets that has a small white plastic piece that has broken and the cabinets will not stay closed. I am looking for replacement hinges.

No obvious markings except Made in USA and Amerock Thank you. Terri

Have a Hooker Hutch purchased in 2001 the hinges are 2 cup inserts 1-5/16 diameter with a total length of the 2 hinges is 2-3/4 inch

It is an Amerirock hinge with the numbers pat 7 5027474 2010-31 on it and it is for a face mounting cabinet.