Viewing all customer Discussions for:

55-197 3' Snap-in Glazing

Please help. Looking for least expensive option that will work well. Attached is a label from inside the window and profile of the glazing piece. Here are some measurements: Flat: 3/16 Trough: 1/8 Rounded section (straight across): 3/4 Full diameter: 7/8 Need the following lengths (t ... (cont.)

We've been trying to find a suitable replacement for this for years.. Do you know what type of windows it comes from? its similar to a Milgard vinyl snap bead but not quite. Its similar to your Product Code: 55-192, but what we're looking for is flatter and longer. Any help or guidance is much ... (cont.)

Looking for this glazing bead, or a sutable substitute for a MASTERViEW exterior window. The windows were installed in the mid 1990's. The exposed width of the bead on the glass is "15mm or approximately 5/8"

Hi. Sierra Pacific which acquired Superseal suggested I contact you for this replacement part. I have 13-15 year old Superseal vinyl windows that I'm in process of replacing some of the glass as they have become defective. I've cracked several of the snap in molding? (glazing?) that resides on t ... (cont.)

Hello, Trying to find a snap in exterior glazing for some windows. I do not know manufacturer. Thickness is .02, but I presume thicker would work. -- Thanks Ken

This was removed from a vinyl double glazed window and I'm looking for a suitable replacement section in white. The windows were installed in Detroit circa 80-90's but my local guy has no luck in finding the manufacturer or any markings indicating who made them. There were some Canadian window man ... (cont.)

This is the glazing piece for the nuair window. Please help identify the replacement part so I can order.

your 55-197 seem to be close, I removed the window several years ago to put in the ac as shown now I need to but the glass back in. The window is 49in high an 29 in wide

Trying to figure what glazing would be compatible

I had to replace glass in some exterior white vinyl windows. In the cold I cracked some of the bead and I'm seeking replacement. The photo supplied is very very close to the profile I need. I tried to cover the measurements shown in the original image and write in the measurements I have taken fr ... (cont.)

I am looking for glazing and window tilt locks I do not have any other information on these windows, there are no numbers on the parts or on the tops of the windows. The size is 3/4" and the small leg is 1/2"

No markings or numbers found on this window

I'm looking for a piece of vinyl glazing bead at least 67" long. It is for a kinro brand window. I can send more pictures if needed.

I need to replace the vinyl glaze Bead around my Ryl-017 S25PW-A/, S25 PWN-A fixed window. About 2ft wide by 4ft tall.

Have a 12 year old house in texas and the window glazing on one of the panel windows has broken off. It's white and approximately 1/2" x 1/2", you have a product with a similar profile, but seems to be larger. Do you have anything this size

I can seem to find a perfect match. Thanks Joe E

Looking for kinro window vinyl

Finishing up a punchlist, but we're having trouble finding replacement snap in glazing. 32" overall width, 3/4" tall (including the lip), 1/2" deep.

I am looking for glazing that I think I found at another site, Part 900-17190. It looks like a 3 line snap-in-vinyl bead. Please verify and let me know if you have this and the cost. Looking for approx 50 feet or more.

I could not find the right glazing. can you please help me to identify. Thanks, Bill