Viewing all customer Discussions for:

87-161 Atrium Sliding Window Roller, 1/2" Flat Wheel

Hello, I live in Arizona and my home and windows are about 26 years old. Can you help me with what parts I would need to order including springs etc?

Circa 2000 My sliding glass window has two nylon rollers in a nylon capsule that gets inserted into the bottom of the window (see pictures) Do you sell this part or something comparable.

Looking for part. No more additional info

Dimensions: 1" L 1/2" W and 5/8 depth no numbers or markings but believe it was from the mid 1980s when the house was built.

Nylon housing, brass wheel. Fits in bottom of window. Part is approximately 1 1/8 to 1 3/16 long, 9/16 high and 7/16 wide. The wheel is about 1/2 inch across. I need to order 8. What part number do I use and are they available? Thanks

Hello,Trying to find replacement part for Atrium slider windows. The roller assembly. The windows are 2012-2013 vintage. if there is anything else you need to help ID these part please let me know.Thanks.--Rod

I could not find any model part numbers for these rollers, but I do need several of them as my windows are having difficulty rolling.

I believe I found the sliding window roller assembly I need (87-161), but need more description on the roller: Is the roller and axle separate parts or all one piece.

this is a 1" long vinyl roller with small tabs on each side. Brass flat wheel.

These are old windows (1985) that slide left to right. Two slides with rollers have failed. Picture is included. Do you sell replacement parts?

Hi,Do you have a stock replacement for the item pictured in the attached file.If so, are you able to sell and mail 20 items to Australia. Cheers,Ivan J.

Hello! I have some Masterview windows in my house - built in 1999 in Phoenix, AZ. I need some new rollers. It looks like your part #87-147. In my photos, there are two pieces - I think they originally were together, but the plastic broke and separated. (These two pieces were not originally toge ... (cont.)

the plastic slider piece at bottom of our Atrium window manufactured in 1998 for a Del Web community is broken. MV-1 is the window number. I have included a picture of the piece that slips in along the bottom of the window and allows it to slide along the track. Do you have any of these parts? ... (cont.)

Can you verify that this is the same as part number 87161. I believe it to be the same part.

Hello, most of the windows rollers in my house have fragmented due to age, but I could not find any useful information on them to figure out the replacement and, unfortunately, not in Home Depot either. I drew a graph attached and could you help me on identifying the replacement, please? ... (cont.)

I have Atrium slider windows that the rollers and lower guides have disintegrated. I contacted the company and there reply was that this window and accompanying replacement parts were discontinued and suggested that you may be able to help. Thank you.

brass roller (7/16" dia, sits in 1/2" opening) suspended in a white nylon or teflon matrix (L=1 3/16", W of narrow part 9/32" W of wide part 1/2"), 4 on the bottom with 2 near the leading edge and 2 near the aft edge. Looks similar to part# 87-147 but has brass wheel and is longer. MasterView Slidi ... (cont.)

I am in need of several sliders for my Atrium windows

The windows were installed around 2001, I purchased your model 87-168 they were a little bit small for the hole in the window frame and the wheel is a bit small I purchased a roller at a local home center with a 1/2 wheel but the width of roller axels seemed to wide