Viewing all customer Discussions for:

95-265 Square Cut 3/8" Screen Corner with Flange

The almond one fits into a 3/8" x 3/4" frame with a 3/8" overlap. The white ones fit into a 5/16" x 3/4" frame that is 3/8" thick on the edge. We are looking for both the ones with the stop and without the stop.

The numbers on the window header is NFRC 100/200 CODE: SPM SPEC: NFRC SERIES: 1800 DH MST: 3050

I have received 24 of 95-246 window screen replacement corners for PGT screens, however they do not fit. Can you match one with mines that are attached in the images above.

I am looking for lefts and rights of the corners and this type of pin to hold the screens in.

Hi was wondering if the your product code 95-265 would fit my broken part as per the images. There's a no 2 stamp on the inside. Measurement is in decimal inches. Need about 40 pcs of these. Thanks

?Hi, this is a picture of my broken corner. As you can see the other 3/8" flange is broken off. This is for my screens. I could use about a hundred of them. I hope this is enough to allow you to know what matches up my part that you have. When I looked, it looked like your part number sch 290wh or 3 ... (cont.)

I believe that our windows are Amerimax. Would like to purchase window screen corners. channels are 5/16" wide by 3/16". Do you carry or can recommend a substitute?

These keys are the same size as 95-246 however the "ridges" are not in the same place. They are 3/32" in from the edge.

the arms on the corner, not including the flange part are 7/8"L x 1/2"W x 1/4"H. They are for a square cut frame.

These screens are in a modular house that's 18 years old, these screens set inside single hung windows and are held in by plastic plungers.

I am looking to track down this style of corner. It is broken on 1 end, so look For part including 2 inserts

looking for the repair parts for the attached screen

Hello,Your screen corner has a different shape than many that we carry. Is it possible that the one in your photos might be broken? If so, could we see an undamaged one, as well as confirm the thickness of your screen frame? That information will help us narrow down your options and research possibl ... (cont.)

I recommend ved my order, and unfortunately they are not the correct corners for my screen frame. The"square" part needs to be on the reverse side of the corner. Is it possible to return these and get the correct corners I need? They don't slide in at all. Those retaining Tabs are on the wrong sid ... (cont.)

Corner keys

I am technologically challenged (I'm old). I needed help to get the pictures from my phone onto your email. Aside from saying "PGT" there is no other reference number or name. The screens were manufactured around 1960, which makes them younger than I!Thank you for your help.

Need this part to fix my screens

This is one of two screens I have for a bay window. It measures 12 x 42 inches inside. as you can seen the corner plastic piece is broken.. So I need to find new piece or find a whole new screen.

Please, help me to find this screen corner. - Angie

Looking for 200 Bottom clips 5/16 with 5/16 over hang with 1 1/8 x 1 1/8 handle... 200 tops 5/16 with 5/16 over hang and also looking for 5/16 plastic black spline