Viewing all customer Discussions for:

36-048 2-Bar Hinge Set, 10"

I have 2 windows that won't crank open. The window dimension is 32 x 44. One crank part has a number 30744D. One of the rails has number 40942. I've attached some pics.

looking for these replacement parts. all seen in picture left and right in white please.

We need 2 rights and 2 lefts top and bottom along with the window cranks.

We did not remove one yet Here are the photos we happened to have.No names on the windows or stickers anywherethe bottoms seem to be rusted and or broken for 3 of them.\ Does it matter which way they open to the outside ?Thanks Leslieor what other info or pictures you may need?

Sending my pictures for casement window parts. The old parts of window is name Wright looking for operator with split arm,left as shown in picture and also sash lock for it

Looking for comparable parts to Primeline #TH 23091 & TH 23092

Hi -I have a casement called Roto HG04. I am told that part is now discontined, is there a replacement part for this>?

I have 19 casement windows from a house built in 1984 with Truth hinges that need replacing. Ten of the windows are 24" wide and nine are 18" wide. I believe all windows have the same operator but the hinges are slightly different. I'm pretty certain the larger windows need your 10' 36-048 hinge s ... (cont.)

Send picture of new hinge I got from you guys with a picture of the old one.. did I get the correct one and I just don't know how to move the PIN. Is there a way for me to move the pin or do I order another one.

Brand: SimontonType: CasementOpens: Hinged on right looking from inside.Photo is of an identical window. I broke the operator shaft at the crank handle, and need a replacement operator.Thanks,Paul

From the inside 2 right upper hinges are broken. They are 8 in long and are made by entrygard brand.

I would like one left set of hinges and controller for this window.Include all hardware ,screws ect.. The hinge is 103/8" x5/8" #961747/03 v3lh 29.75x45.625 V3LH COO26

Just recently replacd two Andersen casement windows. Bottom hinges on both were worn out. From outside both left windows open outward. Each hinge has a "black" rubber or nylon guide. Windows are vinyl clad and were made prior to January 1978 when they were originally installed. I have photo of hin ... (cont.)

Hi everyone, I have two picture of the window, and I'm looking to replace this part showing in the pictures. So I don't know if you can figure it out without any measurements please or i have to get the measurement first. Thank you very much!

Trying to find replacement for Andrsenawning window series 400. Broken part is shown in black on top photo

Looking for replacement parts to a window that cranks outward.

I would like to replace the two hinges on a casement awning window. Is this hinge available?Window mounting bracket 6", arm 6 5/8", slide 2". The number 30122 stamped on metal.Thanks,Jeff

My right hand Anderson, from outside view,Has a rusted pin that the window sits on. That pin slides along the track. It is black and it's trapezoid shaped. The pin goes vertically into the window. It's rusted out. Can you buy just the octagon and pin piece or do you have to buy the whole assembly. ... (cont.)

Please I need the 2 Hinge for this window and you have some one come over to fix it

Am I correct to presume that your part# 39-365 is the direct replacement for my operator shown in the picture? The arm on my operator is 9 1/2" and the screw placement is the same as part# 39-365. Also, I need 10" hinges for these HURD windows. Would I be buying your part# 36-048?Thanks,John ... (cont.)