Viewing all customer Discussions for:

81-288 Sliding Door Roller Assembly, 1-1/2" Dia.

I have a house with a 1970's sliding glass door it has no marks

Please let us know if you have replacement rollers available

Seems to be held in place by a bent out ear. If you have the part I will need 18 of them. Also what is your return shipping policy? Will another type work, or am I stuck with using the same.

Roller diameter: 1 1/4" Height: 1 1/4" Length: 1 1/2" Thickness: 13/16" Adjusting screw is on bottom of bracket; screw to secure assembly into door frame is on the top; assembly has dimples on it. Door frame is all aluminum. I believe it is original door; house was built in the 80's. Could not see a ... (cont.)

I am looking for a replacement for the roller in the photos please. I unfortunately do not know how to read a tape measure. That is why I included pictures with the measuring tape. And in the one photo the screwdriver is pointing to the tab that is on both sides.

No markings or numbers door was here when we moved in 1994

Need the replacement

I am original owner of house, built in 1979. I lived in house for all that time. The patio door has never been replace and never repaired.The door was dragging and wasn't able to adjust rollers. I removed doors today and was able to free up adjusting screws.I would like to replace the roller assembl ... (cont.)

Dear Sir I am attaching the photos and measurement for the part needed. As i explained he parts are needed quite urgently . as senior residents cannot access the patio. the only other way to leave is via stairs and this is quite a challenge . As such any assistance you can give me in sourcing the p ... (cont.)

So this could very well be the original doors on our townhouse, and with us living less than 50 yards from the beach we deal with a lot of salt issues. We have been trying to locate 4 of these rollers and have had absolutely no luck.

Good afternoon,Customer provided me with this photo but no longer has the roller.Hopefully you can match it for me.Thanks,John

If you have a part that has two rollers that is preferable. Anne

Older patio sliding glass door roller assembly. Brand unknown, threshold is 8 feet, Pictures were removed from one of the doors. Pictured roller assembly is in relation to a dewalt tape measure. Steel wheel, diameter 1 3/8 " x 5/16 thick Length 1 5/8" Height 1 9/16"

Looking for a comparable roller to this one

Need parts identified for replacement.

Need to replace rollers (2). Bottom only no rollers at top. Door is approximately 40 years old.

Need to find this part

Hello, I am trying to identify which wheel assembly I need to order. The adjustment screws for this one are behind the fringe that covers the track. They are not on the outside like many others. It appears that the top and bottom rollers are just a single roller design as well. Thank you. ... (cont.)

They were a little too big, on the height otherwise looks the same, 1 7/16" on the height have anything like that.