Viewing all customer Discussions for:

32-053 Drawer Track Kit

do you have anything that replicates this system?

Please let me know if you have in stock plastic drawer guides the name is ronthor pat#3185530 or anything comparable they're 14inches long and need six of them please let me know THANK YOU Tony

Hello, I am looking for a new dresser slide for my Thomasville Furniture Triple Dresser. The bearings and slide are missing. As such the drawer simply falls out when pulled.

Metal drawer guide rails for this system come in two widths; this is the one with the plastic drawer guide/stops that isn't broken. I need the thinner of the two plastic guides from this system.

I have a dresser that needs a center mount track. I will need something that is close to the measurements so that the drawer is at the same height as the adjacent drawers. I don't mind shimming or installing something that will work. The guild is 16 3/4" long (as shown on attached pictures) so what ... (cont.)

As you can see in this photograph the little T tape plastic slide is busted on one side so it no longer retains the drawer in the bottom mount piece everything else is fine except for that yeah

Attached are 5 pics of my bedroom furniture drawer slide system. The rear guides usually bust out and once in a while the front guide. The basis for these guides is the track dimensions pic. None of the parts have any markings of value.What are prices for both front and rear guides? Part numbers?Tha ... (cont.)

It's approximately 13 1/2 by 2 marked RONTHOR Pat Pending. It's a plastic track for several dresser drawers. Please advise where I can find and I'll get an exact number needed. Thanks

I contacted Bainbridge and they pointed me in your direction as you bought all of their 510 stock. I understand you no longer have any stock but i was hoping you could recommend a replacement. Thank you, Doug

Measurements: 1 1/16 wide 13/16 high 15 3/4 long

Attached are pictures of a part that fell off a dresser drawer. I am looking for a replacement part. The dresser has a wooden support/slide that the metal piece on the drawer slides on. It does not look difficult to replace, but I'm not sure how to find the part I am looking for. ... (cont.)

need a few pcs of this to repair a bedroom dresser drawer. Cant find anywhere

Looking for a replacement for this one from the mid 70's. The drawer sits on a 3/4 inch strip of wood that is under the middle of the drawer, front to back. The 3 rollers hug that strip, and also stop the drawer from coming out of the cabinet. Thanks

i am looking for the oval shaped kenlin rite track 2 socket and case runner pieces for 2 sets of stanley furniture. I purchased the following, but they don't fit: Heavy Duty Kenlin Socket 32-082 Kenlin Case Runner 32-076

Hi! What can be done? I triee to look for this guide without any luck? Can I just replace all the tracks and the guide with new parts? Thanks

See photos Do you have replacements for this style. Very little space between drawer and face frame. slides mount underneath

Like to soft get soft close drawer slides the length from back of cabinet to front is 22 3/4 any additional info needed just let me know

Good afternoon. I am trying to track down a center mounted drawer slide. I do not have any part number. I believe the drawer size is 14". Do you have replacement drawer slide for this? I am looking for the slide that is attached to the drawer as well as the replacement that is attached to the c ... (cont.)

My steel bar is 14 inches with 1/4 overhang off back of drawer

14 1/4" long 1 1/4" wide