Viewing all customer Discussions for:

32-053 Drawer Track Kit

I need to know the part number for these two parts and the cost for 6 sets.

The metal tracks are ok but all the plastic parts cracked and the drawers cant stay on the track.

Kenlin rite trackII 168

Slide in a Lane drawer

The drawer glide plastic piece is broken. A piece of wood runs through it.

Hi there, I am trying to replace the hardware for two dresser drawers. The part of the slide that attached to the drawer says kenlin glide-rite and the numbers are 365, 261.

These parts are needed. One is on the drawer itself one one the cabinet to the drawer and leads the drawer on to the steel track

Hi, I believe the width for the guide is 1 3/8 or close. The color is black.

I do not see any numbers on the broken pieces or the pieces that are intact. I see a similar part in your web site but there are 2 pieces and this has only one. They are screwed into the drawer slider that is 15-1/2" long and 1" wide. They are all installed a 1/2" in from the beginning edge of the s ... (cont.)

I am looking for the rail/track on a Vaughan Bassett dresser drawer from the late 90's.

There are 2 of these 18 inch slides that fit underneath the drawer. Only the 2 pieces with the plastic attachment that fit on the back of the drawer are damaged. Thanks for ur help.

I'm trying to find these drawer pieces

Looking for replacement. Number on it is 168.

I need to order a 14 inch center drawer mount and also the piece at the end as shown in the picture

I bought 32-081 from you and on the side that faces the drawer its solid on the piece that on the drawer it has a slot for the metal guide to go into the guide

Would you have a socket to fit this rail? the Maximum width is 1-1/8" and the top opening has a width of 11/16"

I have an unnamed dresser with 4 of these drawer slides completely destroyed. The slides on the drawer box are metal. Do you have replacements for the wooden slides?