Viewing all customer Discussions for:

32-061 21-5/8" Self-Closing Drawer Slide Pair

The plastic mount that holds my cabinet sliding drawer has worn out it snaps into the pre drilled holes in the back of my custom cabinet

Hello, I am looking to replace the slides on my Arisokraft kitchen drawer cabinet. They measure 23 inches and 1 1/4 inch on the "L" bracket piece. The only markings I can find are a stamp of CR-02. Not the offset on the off the wheel at the front with the screw hole. This seems unique compared to o ... (cont.)

Need to know if I need more parts???

Part is damaged in one place on the back where it goes into the hole in the back of the cabinet. There also seems to be part of it missing on the other side as well, where the glide goes in.

Hi! The pics above are from my parents' drawer. The bracket piece with the nylon wheel is what is broken. The actual wheel/roller broke. The cabinets are about 46 years old, so not sure what to look for replacement piece. The patent drawing is one of the photos above. The patent number is: 3384431. ... (cont.)

I need this part it is about 22.5 in long and it is screwed to the drawer

I need to replace one of my drawer rails. Etching says unigrass 6600. Not sure if I need 22" or 22.5. How do I tell? I bought a different band at 22" and it was too short.

3 year old home was missing the DL on two drawers. The picture is of the DR side. The drawer internal slide is present on both drawers, only the piece for the left side (as I face the drawer) are missing. Total of two left drawer parts. DL

Looking for a replacement part

Being told there is not a piece that is 1 1/8 ID. need right and left!

Looking for the replacement part for the rear drawer track socket, and the drawer slide.

Drawer slide part number 320m526 T31 20 inches or 21 inches. Does not lay flush.

Hello here are pictures of the drawers i need to fix

Kraftmaid cabinet drawer needs new runners. What do you suggest? 23 inches total with roller on underside drawer. 21 inches on sides of opening.

I need a new pair of these.

I have 3 kitchen cabinets from Kraft maid cabinetry. And the slides are worn.

Hello, I am unable to find a rear backet that will hold up the drawer guide.

Do you have this part or know where I can get it?

Wheel broke off. Need replacement slides