Viewing all customer Discussions for:

32-061 21-5/8" Self-Closing Drawer Slide Pair

I have drawer slides that measure 22 5/8 inches. they attach to the back of the cabinet and the opening of the drawer cabinet. I can find 22 inch and 24 inch slides but not 22 5/8. The picture of the slide in the cabinet is not attached as the bracket broke. I have ordered new brackets. As far as th ... (cont.)

Hello, I'm looking for a Unigrass 6600 (stampe in the slide) bottom mount drawer slide for a 22 inch drawer. Pictures attached.... The slide measures 22 1/2" long and the cabinet mounted slide has a 90 deg bend at the back that mounts directly to the cabinet back, eliminating the plastic mount th ... (cont.)

Grant 228 Cabinet glides? Looking for a replacement glides for two kitchen cabinet drawers the drawer track length is 23.5" and it attaches in the rear and at the edge of the cabinet. The house was built in 1980's and by the laminate it seems original. Any help much appreciated. Thanks Robert B. ... (cont.)

Hi I need the pair of rails with the offset piece molded. The length is 22 5/8. I don't know the manufacturer. I hope you can help. thanks!

I need a drawer roller track replacement,this picture shows the original,thanks,is 21"and 3/4 long 3/4

Looking for Grant drawer slides for a desk drawer. The slides measure 22". We are trying to obtain one complete set (for one drawer ). Any assistance would be appreciated

I'm looking to replace the rollers or the complete slides on 22" slides that are labeled Jacmorr Mfg. They have the number 3451 stamped on them and also the letters DL CR. I'd prefer to replace the rollers however they are the rivet mount type. I think the slides would be considered side mount. Any ... (cont.)

Your pics detail the height and width of your drawer slides, but not the actual length. i.e...is a 24" drawer slide truly 24" or 23 1/2"? I have a replacement project that measures 23 1/2" from back of cabinet to front of cabinet face. The nearest drawer slide you have is 22". The replacement does r ... (cont.)

TWIMC, The little wheels/rollers came off the side of a dresser drawer. The drawer itself has heavy duty metal sides (6" x 14-1/2") and the drawer front, back and bottom are wood/MDF. There are plastic brackets attached to both sides at the top back, where the metal sides meet the wood back. Thes ... (cont.)

I have a bathroom vanity with a drawer assembly that has a pair of 1/2" (Outside diameter) wheels that fit into a metal track. The wheels (one on each side of the bottom of the drawer -- in the very back) are attached to back of the drawer with two staples. I would very much like to locate a pair of ... (cont.)

I need a few replacement nylon rollers for my drawer slides. The rollers I need are 7/8 inch, with 1/2 inch holes. The first picture is of the drawer slide without the wheel. The second picture is of a complete drawer slide. The third picture is of the broken wheel. I would appreciate any hel ... (cont.)