Viewing all customer Discussions for:

32-061 21-5/8" Self-Closing Drawer Slide Pair

Hi, I need to replace the drawer part in the photo. It's 21.5" long by 1" by 1/4". For the right side. Has a part# MR2031/551. Made in Austria. Can you tell me what I should get? Thank you.

I have a drawer that has unigrass 6000 slider bars. Two of the drawers because of over weight have damaged plastic rollers. I'm looking for replacement rollers or complete rail. The actual rail w/roller is 21 5/8" long. Thank You, Patrick

I'm looking to replace all tracks and rear mounts. The attached pictures give you an idea of the specifications I have now. The drawer itself is 19 inches long but as you can see the slides are longer. I'm no Norm Abrams and don't have a lot of fancy tools - I just want to replace what I have so we ... (cont.)

I am looking for a hanging drawer slides, similar to the ones for keyboard drawers, but I need a full extension, 21 inches. I am hanging drawers that are very close together. 1/2 inch, figured I could off set the sliders so both could fit in the 1/2 inch area between the drawers. I found your part ... (cont.)

Need to replace drawer slides on haas cabinets ,kitchen the plastic back mounts if possible,thank you

Greetings. I just received my product code 32-119 Grass adapter bracket kits. They will work with my drawer slide(s) except one. I noticed that one slide is straight on the end that goes into the adapter bracket. Apparently this one was replaced at some point and was not installed as a pair. The oth ... (cont.)

Is this still available. New part #???

I need 4 replacement Slide rails for an office desk. The drawer is 22 3/4 deep

The roller on the front part broke and the ball bearings fell out. The part is 22" long but then bent into an L shape and screwed into the back of the cabinet. This part seems to also be the support for the drawer as well as the side slide.

I want to replace my existing slides with self-closing slides. How do I measure my existing slides? From the very end of each slide? Is there a diagram available to show how to measure the existing slides? Thanks.

The tracks on the sides of the drawers and inside the cabinet are 18 inches long and are double tracks. The wheels which are riveted on are 7/8inches long. They are from cabinets that were installer in late 1982/early 1983. We appreciate any assistance you can provide. Thank you in advance. ... (cont.)

please HELP I need 6 sets of tracks.all my tacks are old and need to be replaced the measurements are 23 inches in length. thank you

G logo on roller, seem to be 22"

Hello, I need to replace these guide rails. They are 22 15/16" long and 1" tall.

Hi there, will the 32-018 rear drawer slide socket work with the 32-061 drawer slide and is there a London outlet or what time frame to get them delivered from your company? thank you, Hasso

I have a UNIGRASS 6600 drawer slides - 22 inch white - and need to a few rear rail mounts. I see from your site that is your part no. 32-119. What is the part no for the 22 inch metal drawer slides??

The plastic pieces are broken and need replaced. I nee 2 of them. I also need the inner rail that mounts to the drawer. I have np part number but measured 21 3/4" in length. This part mates with outer rail part number 108755FL. Please help!

I need about 24 of these little plastic guides.They work in tandem with your 32-030 center guides - which I just ordered a dozen of. The little side guides have broken on nearly all of drawers. They attach with a single nail and probably a bit of adhesive. I could find no identifying labels, etc. ... (cont.)

The wheel on the cabinet no longer works. Took apart and bearings fell out. It is 20yrs old. What is it? What make? Lowes and Home Depot do not have it. Please get back to us. Length 22 inches Wheel was 7/8? Estimate. Thank you.

I can't find my match for these drawer slides. There are no marking on the slide except for the number "98". The drawer slide is 22" long the cabinet side piece is 23 1/8" long. Have no idea of the drawer manufacturer. A pic is attached. Thanks for your help