Viewing all customer Discussions for:

75-023A 12" Adjustable Hacksaw

Can you help me find a replacement for this? 94.75 inch long. 1 inch high. 3 inch width.

The wheel rails have collapsed on a portion of this track. It measures 115" long. The Track is 2-7/8" wide. Wheel rails are 1-1/2" apart and 1/2" from outside edge. I would like to purchase a replacement track that I will install. This is a 2nd floor closet on plywood underlayment. The existing t ... (cont.)

I'm renovating a house built in 1993. I'm looking for 2 closet tracks each 8' long. The overall length required is 83 1/2". It's for a mirrored bypass closet doors. The doors ride on the tracks. I'll need two tracks. The track width is 2.8". Since it's a bypass door track, there are two raised bosse ... (cont.)

I have heavy metal framed mirrored, bypassing closet doors and the track at the floor is worn to the point of making it difficult to open/close. I'm capable of elevating a replacement track if needed. The overall height of track (top of rails) is 3/4". Overall length is 83-1/4".

The doors are glass sliding the track seems to be bent but its 48 inches long I

I need the bottom track for heavy 1.25 thick mirrored closet doors. The track was removed with new flooring . The upper track is still installed. The dark wood photo is another bedroom with the track. It is 3" wide with two raised grooves the wheels roll over. total length needed is 61.5" ... (cont.)

I have 8ft sliding patio door. Its track is damaged so I want to order new track. Kindly help me to place this order.

Called earlier today needing assistance with replacement bottom roller track and wheels for wooden bi-pass closet doors. Doors are heavy and keep jumping the track You recommended I send pictures— please see attached. Thank you

Looking to replace hardware for 35 year old mirror sliding glass closet doors

Hello I need to replace these for my closets and can't find them anywhere. I need a 60 inch one and a 48 inch one. Do you carry these? If not what can I use which you carry and what wheels do I need?

Hi, I believe the width for the guide is 1 3/8 or close. The color is black.

There are 2 of these 18 inch slides that fit underneath the drawer. Only the 2 pieces with the plastic attachment that fit on the back of the drawer are damaged. Thanks for ur help.

This track is for a glass closet door and is measured at 48 inches and your website has one at 47 inches please advise. Thank you William

i purshased the parts in the picture about 4 years age to repair the drawer slide in my dresser. i cant find the manufacturer anymore but i was hoping you could identify teses parts . so what i need is the steel railing tat works with these "sliders"

I need a 68" length of threshold that will accommodate the mirror door roller in the attached photo.

need replacement as door is difficult to close due worn out and twisted track. track is about 94 inch. do i need to buy 2 x 6ft instead? thanks

19-04, and I already purchased the 32-04 rail bracket from Swisco

Bottom plastic piece and the rail inside the drawer Length 19 3/4"

I need the bottom track for a 2ft wide door and the bottom pins.