Viewing all customer Discussions for:

33-071 #6 x 3/8 SS Pan Head Screw

here is a picture of mine the drip pan is on the inside of the door and I need to know if this one will fit mine because from the left end to left screw is about 3 1/4 inches and on the right screw to right end is 2 1/2 inches. And from screw to screw is 20 3/8 inches apart. And the tong is ... (cont.)

I am trying to replace a shower door flap for a 20 year old Aquaglass Shower stall. I ordered Item #10-319. It fits in the slot of the drip piece but the flap portion that keeps the water in the shower is about 1/2" shorter than the original part and allows the water to leak out. Any suggestio ... (cont.)

Need your help to identify vinyl door sweep which fits in metal drip edge on Centec Pivot CH 1631 Century Bathworks door. Measures 36" long and 1 7/8 high. I did a little drawing to show you the profile too.

I am looking to get a replacement seal for bottom of shower door. The shower door is a 24 3/4 inches. I may end up replacing the entire dripedge. The hinge on the door is on the right hand side when looking at door not sure if that matters. Please advise.

Please help identify this coil spring, pivot bar and shoe. The coil is 1/2" wide. The pivot bar is 3" long. The sash weighs 14lbs.

I have a cheap plastic drip cap shower sweep that's broke. It was put on with glue. I was wondering if you had one that didn't have the screw holes like 10-324.

Screen door roller replace video shows you drilling out the indents to remove the rollers, but it does not show how you hold the frame together after replacement of rollers. Could you please advise me on how to hold the frame together? Thank you Charlie

This is the spring we need to replace at one of our properties. We're hoping to locate the manufacture and purchase asap! Thank you for your time and expertise!

Good Morning..... I'm currently at a job at Knob Hill condos in Manalapan and am looking for the above style rubber shower door sweep in a 30" length. I tried the local suppliers/Home Depot/Lowes, no one has this style sweep. Can you help? Or do I have to order new drip rails with the sweep? P ... (cont.)

I need the springs the both hold the windows up for both sides but I don't know what kind of windows they are I do know that the windows wait 8 pounds if that helps and here's the picture

The door is 27 inches wide and the existing metal piece is 26.5 inches wide.

I have a storm window with a gapping corner. I think it is a larson storm window. Would I use a Larson corner key kit to fix it? Thank you!

I need help finding a sweep for this 35 year old door. The frame measures 23.5 inches wide. The door is .5 inches thick.

How many fastener holes are on this drip rail? Would like to know how many 33-071 screws to buy but this information is not stated in the description of the drip rail.

Hi, What model of screen spline works with 56-090 wicket? I have .14 spline. Will it work with 56-090. Thanks

I need to replace my shower door sweep. The door is 21.5" wide and 1/2" thick (see attached photo). Which part do you recommend for replacement? I don't see any screws on the current sweep...does this mean it was glued or caulked in place? If so, how do you recommend I fasten the replacement? I' ... (cont.)

Swisco's 10-324 (with #6 33-071 fasteners)did the trick for replacement of Shower Sweep and Drip Rail dilemma! Two additional points: 1) Recommend anyone buying the 24"er be prepared to snip off 1/2 inch in order to fully close the shower door. I did not own an aluminum metal shear, ended up ... (cont.)

Hi- I want to know if a door sweep you have would be available. I would like to replace the sweep and not the whole drip and sweep. Also, do you have double tape or do I need to purchase it at a hardware store. This drip was installed that way and there are no screws.

The coil has broken on my vinyl window. There are not any markings to indicate the manufacturer or weight. The sash is 28 X 30. Double pane.

This shower sweep is for a home shower constructed in 2006. Shower sweep looks like product 10-325 but it has no screws. It is a peel and stick type. Do you have a replacement for it?