Viewing all customer Discussions for:

33-071 #6 x 3/8 SS Pan Head Screw

Need price on (50) coil balances and housing First coil is stamped 8 Second coil is stamped 7 Thanks, Ryan The Glass Guys Sandusky, OH

Good day. First of all I would like to say thank you for all advises that you are giving to us who in need of a word from people who know what are they talking about. I have a screen door with wheels I showing on my photo. I found the replacement in Home Depot, but can't adjust the wheel because t ... (cont.)

Hello Swisco Experts, I have a shower door that has a bolt on sweep. The vinyl piece is rotted and almost gone. I'm looking to replace the sweep. The door is 27" wide and 1/2" thick. Please see attached photos. Thanks in advance, Kevin Stevens

Attached please find pictures of a replacement window part I am looking to purchase. The measurements of the sash is 28

I would be grateful if you can help with locating the correct shower door sweep to be attached to the drip rail (26

I apologize that I do not have a picture of the product installed. The only stamps that I can identify are 6(or C)K on the coil and the letter P on the inside of the plastic housing.

Enclosed are pictures of the outside, inside and end views of my shower sweep. It measures 20 5/8 inches long and the rubber itself is 19 1/2 inches. It is attached with 4 screws. What can I order to replace it?

Does the drip rail come as shown with the vinyl sweep and screws required for installation or do I need to purchase those separately?

I have to replace some non-tilt balances, and I'm not sure what I need to order. The balance I took out of our window measures 36.5" and 3/8". It has a red tip. Also, on some of our windows, the metal piece on the actual moving window that connects to the bottom of the balance is broken. The ... (cont.)

Hello, Can I use a frameless shower door sweep like 10-328 or 10-331 depending on glass/door frame size to replace a shower door sweep like one that like 10-324, 10-325 or 10-326? The frameless sweeps look/seem so much better and appear easier to install. I appreciate your help and look ... (cont.)

Hi..my three shower doors need to have rubber seals replaced. I am not sure the ones I see match mine....it looks slightly different. Attaching a picture...if it is not clear enough, I can try again. Thank you.

screens about 50 to 60 years old

I have a sliding glass door with a handle that appears to be your 82-005 with a 4 15/16 screw spread, installed new when my house was built in 2000. I want to add a keyed lock on the outside. The 8 1/4 inch long plastic pull on the outside is fully recessed into a 7 7/8 x 13/16 inch cutout on the o ... (cont.)

Hello, I need help finding a replacement for my shower door sweep. I would like to get the one with the rail. But here's my problem - The one I have (see pictures attached) measures 24.75" and the holes are 10" apart in the middle and 6" apart on the ends. Do you know if any of your items ... (cont.)

Hello, Does drawer guide 32-030 come with the installation hardware? (If not, please advise on what size hardware is needed). Also, is this part available in clear nylon, or any other colors? Thank you, Michael

Gasket is missing. Do you have one? Looks like it screws behind the water shield. Should I just put a whole new replacement shield with gasket?

PART # 85-011 This part seems to break on me every year. Can you tell me what size screws I should be using because last time the part broke with just a slight pressure of a screw. Do you have a heavier duty keeper made of steel and not pot metal that would work?

The rail is not as wide as the door bottom, and I'd like to know how to position the rail (left to right) on the door? Also, do you have the replacement screw? There are three screws, pan head, phillips, sheet metal threading (pointed), look like galvanized steel. Length of screw is 5/16" total, ... (cont.)

I ordered the 33-071 screw to install your 56-090 Screen wicket. The screws don't grab securely to the screen frame, and tend to come loose. Is there a recommended, better hardware option? Thanks!

What size screw do I need to fasten this shower sweep?