Viewing all customer Discussions for:

32-340A Full Overlay Soft-Closing Concealed Hinge Set

There is a 17M stamped on the back of the cup, and 314.3 on the interior of the section that attaches to the cabinet frame. The hole spacing on the cup is approx 48mm, and on the part that attaches to the frame is approx 33 mm.

There are no markings other than stainless steel and H=O. The overall installed length is 4-3/4 inches. There are 2 indented "stripes" at the edge of the hinge over the underlying spring location.

Looking for soft close hinge to replace my non-soft close hinge. Attached photo.

Need 30 pair. Thank you.

brand UTA, H=2

Cabinets were purchased/installed back in 2009 by a contractor who claims they were 'Cabinets to Go'. Have a quick disconnect button on the rear. Are 4 1/2 inches long. Distance between screws on thew door is 1 3/4". Distance between screws on the cabinet ar 1 1/4. Distance between the tw sets of sc ... (cont.)

They are labelled 905 881-2153 I need 4 hinges. An exact match isn't required, just the closest you have. Thanks!

Hi Swisco, im looking to replace the FGV hinges on a china hutch. The existing ones are FGV made in Italy, but don't have a part number. Any alternative is acceptable. thanks, mark

I have a Hettich hinge with the numbers 1756 and 54 stamped under the cup and 3349 stamped on another part if the hinge. 1747 is the cross mounting plate. Do you have a replacement equivalent hinge?

Looking to replace hinges please identify

Hinge 80.850-E1

Please help with identifying this hinge based on measurements. Thanks Bernadette

The only numbers that I see on the hinges are F1, 12 and 21A. The piece that fits into the hole in the door is plastic. Do you have anything that would work? The piece that fits into the door doesn't have to be plastic; really would prefer metal. Thanks for your help!

For kitchen cabinets installed in 1998.

Could this be replaced with your:

I don't have photos of it intalled; the mirror was hanging off & we had to take it apart. Hoping someone can help me replace!

Will your 32-349 fit this application?

My 1991 cabinet hinges are starting to fail. Do you have replacement hinges that will serve as replacements and not require routing out the hinge's pocket?

The hinge has to open and swing out.

Where can I get it ? It is installed on my custom order kitceh cabinets from Home depot 25 years ago