Viewing all customer Discussions for:

38-055 Window Lock, RH

Old aluminum awning style windows

I have a wide horizontal window that is hinged on the top and opens outward. These are the latches that are inside and I am missing one. I can send you a picture of this on the window if that would be more helpful?

Holes are 1 3/8" apart.

Good afternoon, I'm looking for older window levers for locking and opening windows. thanks

I'm looking to replace the handle for that broken window

Hi. I am looking for this latch or anything that is close. Thank you.

I need to replace 14 handles, 2 bug screens, and one metal mesh protective screen on the ground floor. the bug screens are sized 32 1/4 x 14 1/2 x depth of 1 1/4 the protective metal screens are 41 1/2 x 16 3/4 x depth of 1 1/4

I am looking for the plastic wedge which is 1-5/8" x 1/2". Pins are offset 3/16" and are 1-3/16" apart center to center. The distance from the edge of the lock mount to the end of the arm on the wedge is 5/8"

Hello. trying to identify the attached hopper window handle/lock. Please see photos attached. Geoff

this goes on older commercial windows. they tilt out at the bottom, and the only other moving parts are the hinges.

Please help identify this latch and part you stock

Need 3 handles will check for right or left.

Looking for the window locking mechanism without a handle like in the 1453 photo. Currently there are top and bottom with handle (photo 1454) but the middle has the lock operated w/allen key? I want to replace all the handles with the allen lock.

Im looking to identify a side mounted custodial lock and keeper set. These photos are the ones currently in place. Even if you can help identify the existing part it will make finding the replacement easier. Thank you

Hi, I bought a casement window handle, but the holes don't line up with the old holes. Do you have any handles with 1-3/8" holes spacing? Thank you. Steven

Can someone help me identify this handle? It looks very similar to the one in https://www.swisco.com/Window-Lock-RH/pd/Locks-for-Awning_Casement_Hopper-Windows/38-055 The clearance measure is the same. But the screw hole distance from my tape measurement is 1 7/16", slightly larger than 1 3/8" in t ... (cont.)

Dear Swisco,I am writing to see if you can identify the window cam handle of which I uploaded photos. The dimensions are as follows,1 7/16 inch between screw holes3/8 inch from back of base to underside of nose7/8 inch approximately from line of screw holes to bottom of nosePlease contact me. Than ... (cont.)

Looking for replacement latches similar to the photos.

We have old aluminum windows in our church. The bottom pane tilts out from the bottom. One of the latches is broken. It looks like you might have a replacement available. The hole spacing is 1 3/8". Is there any other measurement we need to do?Please advise.Thank you,Peg

Lock orientation is vertical and appears to be bronze colored. It matches part #38-055 : Window Lock, RH which I ordered recently