Viewing all customer Discussions for:

39-002 Window Crank Operator, 9"

Please review the photos and confirm which operator will work for my application. It looks like #39-001 and 39-002 is a match. However, #39-045 and 39-044 also look like a match. I couldnt find any identifing markings on the crank/operator, The home was built in 1952. I didnt measure the hand lock b ... (cont.)

I have 24 windows like this: Rusted and many layers of paint. Some are operational, many are not.

Hi, I have several windows that need a new crank. The ones on your website look like a match. Can you help me confirm if the ones you have will work. Thanks

part on left is not working properly.

Need 2 cranks to replace malfunctioning parts.

Marking on the back LH Made in USA 2 Window cranks are from home built in the late 1950's. If you have the cranks, are different colors available?

Request you to please quote us on attached pictures Left hand and right hand

this already broke once and I repaired with what I found locally. I t broke again. Do you sell this piece

Hello, hoping you can help me match the crank handle for my windows. The house was built in 1952 with a small remodel in the 1970s. There are no markings on the cranks or windows except for a small number 1 on the crank handle. Please let me know if you need more information or photos. The main box ... (cont.)

I purchased the following part from you: 39-344 - Fenestra, Casement Operator, 9". It does not fit because the space between the metal cap and the arm exceeds 5/16". My old casement operator has a 5/16" space between the metal cap and the arm. Based on my research, the correct Fenestra part no. ... (cont.)

These are from 1930-1950 (house was built in 30, but these could be from a slightly later addition). The metal is slightly soft, maybe zinc or aluminum cast? Have found no markings on any of the frames Ive stripped so far.

Hello, I am looking for this part or something similar for my windows. This particular metal arm is 9 1/8" from tip to gears. I am in need of a few of these.

Just curious how much a replacement "Gear and Worm" ? operator from H. S. Getty would cost. I have 1 broken one, and one that could be replaced.

Casement window crank is hard to turn and gets to a point when the windows an inch from closing that it can't close anymore

Our customer has 54 single casement windows that need replacement hardware. They are looking for new hinges, operators and keepers. Please see the attached pictures and let us know if you have anything we can use. Attached are photos of the bottom hinge. I will send pics of the operator and keepe ... (cont.)

Thanks for your help in identifying a replacement part for this Bedroom window crank, circa 1960. David

two different mecanisms, one must have been replaced in the past already. Sorry, no markings found.

good day. Having trouble finding the existing crank I have. The reason I'm replacing is because having the window open the wind moves the window back and forth rather then the window keeping still. I'm thinking the pin has worn down. Also is there such thing as a crank extension ? My existing crank ... (cont.)

The area where it is secured to the frame broke off it is one piece it slides in a track on the window

Hi, I have a 65 year old house and one of the cranks "died" on me. Stripped out I guess. I measured the arm at about 7.5". From inside the house the window is on the left, opens outward to the left. I need your help! Thanks!