Viewing all customer Discussions for:

39-045 Getty Operator, 9" arm

We have a small jalousie bathroom window (approx 24x36) in which the window crank no longer works. The handle itself looks OK, so likely the gear is stripped inside the mechanism. The operator is on the bottom left side of the window. I do not see any markings or identifiers on the one I need to ... (cont.)

Hi- This casement operator has a 9" arm and is metal. Seems too sturdy to be aluminum. We need the right hand replaced but depending on price may also do the left, to be safe, as it is also original. Not sure which to order due to the mount placement and limited space between the mount and the ... (cont.)

Hello, I am looking to replace some old Getty operators with a 9 inch arm. it looks like they might be part #39-044 and 39-045. please see attached photo's and let me know what you think before I order them. thanks for your help. the part number etched on the arm is Getty P411 6,P6. Brien ... (cont.)

Dear Swisco, We have a school with casement windows. I'm looking for a stronger operator. It looks like the 39-001/002 and the 39-044/045 would both fit my windows. Which one is stronger inside? I'm looking for something that can stand up to a 12-year old.

I know its hard to see from the picture's. When you pick up the operator it is heavy and solid not like the thin die cast. The one in the picture has a 9" arm that will work but 11"arm will be better. We will need 50 left and 50 right and will need one first for approval. Please no delays ... (cont.)

No name, numbers or stamp to identify manufacturer of this window crank for a casement aluminum bathroom window unless it was painted over by previous owner.

I need to order 2 window winders to replace ones seem to be original to home build in 1935. It says Getty on the arm of the winder. The arm is about 9 inches in length.

Hello. I recently purchased several 9

The interior gear seems to be stripped. Fentron is stamped on the handle. That's all the info I have. Would like to purchase a replacement, possibly more as I work through the house. Windows are circa 1962

Hello, I have several old casement windows that have the gears stripped on the arms. The operators and the worm gears are all fine, but the arm gears are stripped. By my measurements, your 39-001 and 39-002 would make full replacements possible, but I was wondering if it is possible to just get ... (cont.)

The arm is 9" from center of wheel rivet to center of pin (as shown on your site) the distance from the mounting screw hole center to center is 4 3/4" and 3 7/8". I need 8 left and 8 right in bronze. Also, I need one track for the bottom of the window that the roller fits in. The windows are metal f ... (cont.)

Need r and l for this. 3 7/8" inner holes 4 3/4 outer. 9" arm. Handle stamped Fentron Stella casement frame

I have oldish metal casement windows (installed in the mid 1980's) and would like to replace the operators. Your Getty 39-045 9" Operator arms look like they may work but I need to know details about it. Specifically, is the back of the operator arm where the round disc on the end is attached flush ... (cont.)

Hello, I'm the administrator at a church and the sexton has brought this casement operator to me. We need two RIGHT HAND and one LEFT HAND. Attached are photos of the left hand operator; it has no identifying marks on it. However, the sexton found the word 'Ualco' on an operator in another room s ... (cont.)

Do the 39-001 & 39-002 crank assemblies come in bronze?

Have read some of your other replies and greatly appreciate your knowledge and consideration of the questioner. This 39-045 operator is the closest thing I see listed to the stripped out operator I removed from what I believe to be a "RADCO" aluminum casement window new in 1978. Screw hole alignmen ... (cont.)