Viewing all customer Discussions for:

39-045 Getty Operator, 9" arm

I would be thrilled if you have a replacement for this mechanism. I have a house with very old windows which use these cranks

Hi there, the window operator seems broken. It won't close the window anymore, it only works from full opened to a 90% closed, and then the cranking doesn't do anything anymore. Which model do I need ? The arm measures 9 inches. The lenght from top mounting hole to the bottom hole is 5. 25 inches it ... (cont.)

My windows were installed in 1935. There is a stamp that says GETTY - PHILA PA - PATENT PENDING. The arm is 10" from the center of the crank to the button near the end. The screw holes (that go through the frame of the window) are 4" apart. I may also need to replace the track.

Truth ellipse straight arm operator 3/8 spline

No makers marks, aluminum, swings to the left, arm is 9 inches after the curve. Mounts via 4 bolt holes

This is an awning assembly needed for a rehab we are doing. I see something similar on your site but it has a shorer lever arm. Please adviseRegardsMark

I just provided the photos of Right Part of the Window and I need 15 of them, as well as 20 left parts (that is absolutely the same size as right one) 15 Right Parts 20 Left Parts 1) How much will it costs for all of the parts? 2) How long it will take to deliver the parts to Brooklyn, NY 11229? ... (cont.)

Hello, I need to replace the right and left side casement operators in a JT Garden window. The attached photos are of the left side operator. The 39-466/467 have the same hole pattern but the arm is slightly longer I think. Can you please help me with the correct part numbers for the replacements ... (cont.)

Do you carry this handle replacement for four aluminum windows (opposite cranks). I see you carry replacement tracks that supports the round fitting.

Hello! I'm reaching out for assistance with replacing the crank handle for one of our windows. The current crank handle (please see the attached image) needs a full replacement, and the neighboring window is missing this part entirely. Could you help identify the correct part(s) and advise on ho ... (cont.)

Looking for the swivel knob for these window cranks. See photo of crank with knob, and crank without knob. I need the missing part. The mounting hole is 1/4 inch diameter. Thank you very much.

i removed a part of a casement window from an old house I own built in the 1950s It has no markings of any kind or numbers. We would greatly appreciate it if you can identify the part. Thank you in advance.

For casement metal window in building constructed in 1936. The arm is 9 & 3/8". The arm is 3/4" wide. The mounting holes are 4 & 1/2". The manufacturer or markings of any kind.

These are for a 1959 Airstream with Hehr windows Each window has a left and right operator.

Hello, We are looking to the hardware pictured below for a residence in the Los Angeles area. Do have anything in a black or dark bronze finish that might work? Please let me know if you need additional information. Thank you

This is LH side. Looking for the replacement and measurements for the RH side

Hi. We have many casement windows in our house where the crank mechanism no longer works. I'm looking to find a suitable replacement product. I think the internal mechanisms have become stripped. Thank you.

18 inch window. I need 2 of these openers.

I'm would like to purchase a nine inch casement operator in aluminum. 39-044