Viewing all customer Discussions for:

39-045 Getty Operator, 9" arm

Hi, I'm hoping you can help me source a replacement for a window crank and guide setup. The aluminum guide measures 13 7/8" long and 11/16" wide at the outside edges with a slot between the roller guides that measures 7/16" wide. The guide roller piece is secured to the of the mechanism arm and ... (cont.)

I need 10 of these operators and probably new tracks as well.

Hi there, I have had a really good experience with your platform in the past and I am hoping that you can help me once again. I am trying to source this part for an aluminum window in a rental property. This is just one of the windows, there are three altogether. As you can see whoever came before m ... (cont.)

Do you have the subject operator in your inventory?

I have a crank that slips when I apply torque. It slips on the internal teeth. I have attached the picture of two different cranks. Crank A and Crank B appear to be similar, but are actually of different makes and brands. Crank A - The disassembled crank is the one that slips. The end to end le ... (cont.)

Hello Swisco Expert(s) - I am seeking to replace worn out casement window operator mechanisms in my house. 1) Casement Window Operators - right and left. 2) Casement Window Operator Handles (see attached pictures). 3) Screw inset into Casement Window Operator Handle that engages with metal spli ... (cont.)

Could you identify this crank? It is attached to the window frame, not the sill. I can not find the 1/2 circle style, only rectangular ones that attach to the window frame like this. I am looking for 4 Right hand and 2 left hand with 9 1/2 inch arms. Thank you

Please see attached pictures. We are looking for something similar to this window hardware. Can you please help us? Thanks,

Can I use the stop device on older model metal windows?

My casement window handles were stripped and did not work. Handyman bought new crank handle from Home Depot, and it almost immediately stripped as well (white one in picture. Original was similar size but silver color). Handyman says we need a longer or stronger one to lift these heavy old windows. ... (cont.)

What size screws fit 39-141 crank window operator. Thanks

I work for Salem Heritage in Winston Salem, NC and we are a window restoration company. We also install storm windows. One of our customers is getting interior storm windows and has asked if we can replace their window cranks as pictured here. These windows are out of a condominium that dates bac ... (cont.)

I think this is a Getty 9" arm (39-045). Can you please try to verify

Hello!I was referred to you guys for older window cranks. I have uploaded the photos of the crank(s) I am looking for. I need one that allows the window to open to the right hand side. I need one that allows the window to open to the left hand side. Can you help!? Thank you James ... (cont.)

Please help identify and locate replacement(s). Right window's crank plate is cracked. Have two casement windows, so ideally need two sets. No manufacturer, logo, numbers visible from this angle. Will be eternally grateful.

HOPE'S A 90 L

Hi! I am looking for a couple of replacements for my casement window cranks. Would you have something comparable? Thank you so much!!! Connie

Looking for the peice that holds the crank and the slide goes through . It is 28 1/4 inches long and is held down by four screws . We get the crank outs from you and thought maybe you might have some way of getting them .

Looking to replace 150 cranks on casement windows. The arm size is 11" center on center.

Hello. We have just bought a home with steel casement windows from the 1930's. The need new casement window replacement operators so we can open and close and lock them properly. (Or else it is possible that if we were able to somehow just replace the mechanism that holds the cranks that could work, ... (cont.)