Anjac Screen Door Latch And Pull, 3"

Non-handed replacement latch and pull with security lock feature. Used on sliding patio screen doors manufactured by Anjac doors. Constructed of black plastic; installation holes measure 3" on centers.

Installation tips: Remove old handle assembly. Install latch spring hook by grasping tip firmly and inserting it into screen frame until square drive is visible through center hole in screen frame. Insert both operator levers into latch spring. Be sure square drives engage and are at same angle as shown in drawing. Install small screw from inside. Next, install handles (outside first) by slipping end of operator lever through handle. Place lock tab onto inside handle and install onto frame as shown in drawing. Install black screws and check for smooth operation.