Casement window crank hardware; the part number on the handle is 45054

Question

The windows are still good but the handle has stripped.  I have a smaller casement by the same company that I might also want replaced.  The part number is the same on the handle   The second window is narrower and shorter but also a casement; I can send you pictures of that also if you have the parts for this window.  I think my friend can replace it for me if you have the parts.

Dave Sr. · Accepted Answer

Your handle appears similar to our 39-114L, or the 39-205 if you'd prefer a fold-down type. These should fit the casement operators shown in your photos but if you wanted to be 100% sure you should measure the diameter of your handle's hole. If it's 11/32", then you're good to go.

As for the operators themselves, It's tough to say from your pictures. We can't really tell much just by looking at the whole window. Start by looking at our 39-027E and 39-028E, which have a 9-1/2" long arm, or our 39-013 and 39-014, with the longer 13-1/2" arm.