Viewing all customer Discussions for:

Door & Window

Window will not stay open.

are these part available?

Number 138 on part.Don't know door manufacturer.The top of the wheel assembly slides into the frame and a screw holds it in place.dimensions are 1" high 5/8" wide 2 and 3/16 long wheel is 1 1/8 inch

It measures 27" on the metal part. I don't know how much weight it needs to hold. We want to replace about 12 of them in our rental units.

Hello, Any recommendations? It is about 4 inches long and 1.25 wide Thank you

8 windows with all the same balances. Also need to identify the tilt slider shoes will need removal tool and spreader tool

There is a stamp on the side of the old one: 28 3 EW CMC 4 which one do I need?

I need both side a replacement window lock. I believe the depth is an inch or slightly less and the width is 2 1/2 inches or so.

Hi I need one of these to complete my work .

The channel is 30" metal only. The sash weight is 17lbs. The width is 7/8"

I'm sorry I don't really have much information about the glazing other than it's a 2010 house with original windows with white plastic casing. I'm happy to mail in a section for you to look at or take different pictures for you. I'm also happy to go with a different trim and I'll change it all but h ... (cont.)

This is a small plastic clip which fits on the aluminum edges of sliding Milgard windows that moves up and down in the (aluminum) channel. It seems that they are installed to reduce the friction of sliding and or to prevent wear on the painted aluminum. These clips are 0.44" tall x 0.37" wide and ... (cont.)

The length is 33 1/2 inches long The stamp is 33-61 lbs caldwell Lp-1 The tube color is gray The bearing on the end is yellow , The window has two balancers on each side with one carrier of each side. The bottom two pins are 1/2 inch in spacing. We need 4x balancers in total with two carriers, pl ... (cont.)

I purchased the crank operators which were the correct ones. Now I am looking for the hook or keeper in the lower corner. I am not sure what the are called or the window manufacturer. They work independently of the crank. When the window closes a pin makes contact them, then they hook on to the pin ... (cont.)

Hi, We have a customer who has channel balancers for a tilt window, and we are trying to find the best replacement. We’ve attempted to source the closest possible match on your website but haven’t had much luck finding something suitable. We have found product code S795-34 that seems lik ... (cont.)

please help identify this balance , will need twenty, more parts needed will send in seperate request, thanks for your help i think it might be S385-17 ??

No identifying numbers found. I need to find the part(s) required to repair this window. Thank you in advance for any assistance

Looking for this item here. 1" wide plastic retainer clips to help hold in my window screens

I just purchased 2 window balances 390 series 1810 they fit perfectly but only 1 side works i realized the right window guid was broken can you tell from these pictures what part number I need

Already out of window . looking for quantity of 8