Viewing all customer Discussions for:

Door & Window

Searching for a replacement roller for this original. Thank you!

The window sags when opening

Trying to locate replacement

Windows were put in when house was built 2000+- The part that breaks is the back part that the lock goes into. Do you have these parts and what is the price. thank you. Rick

Hi there. The two coils on my ViWinTech window broke. The bottom half of the window opens about 18" or so. The only stamp on the coil seems to be an "F". I think I need S152-9(?). The shoes and other hardware all seem to be fine. Thank you!

Anderson windows, left and right Crank assemblies and handles

30" window balance

Good morning, This is pictures of broking parts, windows; H-R55-44x71 Thanks,

Could not find any part numbers on removed parts. The photo showen is from another similar window. These windows were installed in 1997.

Need operators handles and coners white can you send me a quote

We have an older sliding glass door from the late 70s and need to replace the rollers. Could not find any markings on the hardware. Inside diameter of hardware width = 5/8" Overall hardware height = 1-3/16" Roller is approx 1-1/2" and metal with a V-groove to slide along lower rail. Only one screw h ... (cont.)

My window lock is not keeping the window firmly shut anymore. I am hoping if I replace the lock i can improve the air seal of the window.

Looking for replacement. Tubes are 33 inches long, about 5/8 inch in diameter and the sash weight is nine pounds. Window is double hung maybe from 1960s or so. Also, if no replacement parts, can we clean them/ lubricate and reuse? Thanks

Not sure if thisnis Swisco handle, but this handle becoming more loose and makes clicking sound when opening and closing as if it's not tight enough and theres a little bit of play. Thanks

Looking for the top and bottom window hardware for this Hurd window. Windows are all original on a home built in 1979. Pictures are from the bottom hardware.

Trying to identify window balance part number. Stamp on metal channel is 26-3 0715 VBS. Pictures are included of the plastic ends. More pics available if needed.

Truth casement window crank handle and operator and lock

This window crack opens the window from right to left.. it has a handle that folds over, It broke and does not work. I need a new replacement part. I don't know how to tell What the part number is and where it's located please help me.

Channel marking: BSI 3440 Channel width: 1/2" Home built in 1996, most likely original windows

Nylon wheels 1 1/4" in diameter Housing is 3 1/16 long and1" deep by 3/4 wide Screw holes 1/2" center to center