Viewing all customer Discussions for:

Door & Window

1/2 inch Vinyl window 24 4 BN CALDWELL is stamped on the side

ordered 81-112 was not correct it appears 81-036, may be the correct one will be trying to return the others.

Looking for replacement. Did not see any identifying names, numbers, etc.

Circa 1971 grey color

This is a channel balance for a Kinco Window built in 1994. The balance has a stamp that reads "24 3 HN CALDWELL". It is 25 inches long and 3/8" wide. I probably need six of these.

Hello, I need to order some new 500 spirals. The old spirals no longer have a sleeve so I am unsure how to measure them. windows are 40" tall and I think I need a 38 or 39-inch spiral. Photo below. Thanks

I need to replace some window latches that slide into a groove in the window. They are 2 7/8 long, 3/4 wide with a center slide. There is a LH & RH latch. They attach by sliding into that groove at the top of the window. Thanks ART

I need two (2) replacement rollers

No markings on bat

Hi I am having trouble deciding between replacement series 380 or 385. Can you tell by the photos and make a recommendation? Legnth of the balance is 30" weight of the sash is 19.5 lbs Thanks, Steve

unit is 7/16" wide

Hello, Please help me identify the replacement part for the attached roller. It is for a glass patio door. Thanks

Dear Swisco, Thank you for your help in advance. I have some single hungnon-tilt windows with Channel Balances that are shooting up to the top of the track and some that fall down to the bottom of the track. Can you help me understand what the different causes for the channel balances being ei ... (cont.)

It goes into a Malta Window

I have attached photos of this window bead, can you help me identify a replacement?

Looking for 13 1/2 inch caradco casement window opener ( RH )

I am searching for the following part. Please let me know if you need any additional information. The window is a double hung vinyl sash with UNIFRAME stamped on the hardware latch. Thank you for your help.

need ten of these pivot bars. thanks-ej

I'm looking for this keeper latch -- not sure who the window manufacturer is. Thanks.

Do you carry any parts like the pictures attached. I have included a small schematic. Regards Mac