Viewing all customer Discussions for:

Door & Window

I need a plastic? door sweep for a steel front door installed in 1985. I have four apartments with these doors that need replacement. The snap-in gap is 1 1/8", width 1 5/8", and length is 35 3/4" long. Attached is a photo. I hope you have such a sweep! Thanks, Bruce

sorry, I don't have much information on this. It's from an older aluminum awning window, single glazed in a commercial building built in 1976. the awning is the center lite with a fixed lite above and below.

I have Anderson casements here at the hotel, 1964 vintage. The casement operators are stamped 7073B on the left openers, don't have a right handy to see what's there, but I need rights and lefts. Are replacements with 11.25" arms available? Thanks. Landon

I don't see this in your parts list

IM LOOKING FOR AT LEAST 3 BITS CAN U FIND THESE & WHERE I CAN ORDER THEM ITS BEEN YEARS SINCE I BOUGHT THESE THE PERSON I BOUGHT FROM IS OUT OF BUSINESS HOPE U CAN HELP

I ordered S371-24 doesn't fit

Hello, I am needing to buy 3 replacement cranks for 3 different windows. They all seem to be the same exact part(s) for each window. I've included the picture of the part after I've taken it off the window. I have noticed the part numbers: C-9400-1A AND F-9400-8A The arm part seems to ... (cont.)

I am trying to intall a good key lock on this sliding glass door for the back of my house so I can lock it from the outside. Its been tough to find.

looking for replacement balances for Nu air windows. part # 34-9 KX CMC7.

I need to replace the pile in this storefront door. Is this something you carry? Picture attached width of cavity is 1/2" and is for standard 7'0" door.

Howdy, I need to purchase new balance springs for my windows and the 351 1/2" series appears to fit what I have except for the balance shoes. I think mine are 15-003, not the 15-002 that come attached. Can we custom order prefab balance springs with the 15-003? I will go home this evening ... (cont.)

I am unsure what brand of window I have in my 1997 home. My guess was Milgard, but was told by the lumber company (found an old sticker) that it may be a Weathervane which is out of business. I am not sure. I am in need of some replacement locks (a lot are really bad worn and barely hold) and a f ... (cont.)

Markings look like "29 4 JU CMC 7". Metal channel is 30" long and approx 1/2" wide and 1/2" deep.

I'm looking for a handles for a bi-fold mirror door it attaches to the side of one of the doors and when the doors are closed its a thin handle.

Please inform me if this is something you have in stock.

I am in need of replacement leaf springs for the latches on my "All-Weather" aluminum sliding windows which are way more than 20 years old but still in great shape except for these springs. See the photo attached to make sense of this. The latch as pictured there is 3" long so the leaf spring be ... (cont.)

Hello, Want to be sure I am order the correct replacement balancer. The only Identifying stamps on it are: M600-17 11600-17 C216#23855 Can you recommend the correct replacement? Thank you, Bert

Stamp on old balance is 36 4 FO CALDWELL. Would that match up to the 3540 weight?

Hello, This window balance is 23 in. long and 1/2 in. wide. Thanks. Jennifer N.

Hi! I have a broken crank however I don't know what model is my window