Viewing all customer Discussions for:

Door & Window

Hi, Can you please provide the measurements of the 39-205 handle when it is in the FOLDED Position? And will require to be screwed in or does it sit in the existing groves without requiring any further hardware? Thanks.

We have a 30 yr. old building & are trying to find replacement roller wheels for our sliding windows. All I can find on the blueprints are a reference to Howard Industries in Miami, Series 75A roll sash, bracket #HS-A2-HP. Can you help me locate a vendor who would be able to help me? Thank you, G ... (cont.)

Does this 70-195 pin comes with a spring? Thank you

Currently all of the sash support hardware sold on SWISCO.com is only for replacement and is not recommended for new applications. You may want to contact a local contractor that is familiar with wood windows; you may be able to get a referral from a local mill that makes wood windows for a new bal ... (cont.)

Gents, I have purchased in the past glazing of this basic profile in a black color (55-006). I no longer have the original invoice, and have run out of this glazing. Is the Grey color better called Black? Help!

Is the price listed for the 70-180 for one clip or for a pack of clips? Do they come with hold down screws?

Can you please send me the measurements of the 55-050 part.

The installation hole centers of the 40-058 storm door handle set is 1-3/4". The measurement from the top screw hole to the center shaft is 7/8". The picture below is a view of the back of the handle with the dimensions you requested.

your specs for the 84-011 say 1" witdh, but I need to know if this is correct, whereas the ones I want replace are identical, only that the witdh is 1 1/8". We will be purchasing approx. 50 of these, so must be correct

Looking at the stamp as 15-1 it could be 1510 option but looking at it as b 15 it could be 1520. Weigh the actual window sash. 1510 will carry a window sash load of 4 through 6 pounds, a 1520 will carry a weigh range of 6 through 10 pounds. This information is based on 2 balances ... (cont.)

do you carry rolled screen frame to fit octagonal corners 95-163

I am a little confused. I had ordered a top tilt latch rh from a local hardware co and the part fits on the left side. Am I ordering the right part. I don't know if I am supposed to determine left or right by looking at the window from the inside or outside.

Is there any method to identify the window manufacturer?

Is the wheel doameter on pn 81-056 1-1/8"?

We need to know what the option 18c,18b,18c means? The Balance on your web site looks like the ones we need, we just don't know which option to choose. We don't have any numbers on the balance to refer back to.

Yes, the shaft of this crank handle has a hole for an installation screw to slip in.

No, the 20-007 wood window sash lift is only available in brass finish or antique brass finish.

What is the height of the 15-003?

What is width of 81-004 roller? Are there any other similar assemblies with 3/8 to 7/16 wide X 11/2 dia roller?

The series 390 has 15-001 shoe and 19-002 top attached and the series 380 has 15-005 shoe and 19-005 shoe.