Viewing all customer Discussions for:

Door & Window

Not sure of this exact part. It's a pivot lock. Windows are 20+ years old. Vinyl. there is a cutout at the top to remove the part.

I have a 32" black aluminum storm door (can't find a brand or model number) that is 1 5/8" thick and has a brass-finished bottom door sweep with three channels that accept black vinyl fins. The fins are 1/2" wide and look sort of like a "Y" but as you can see, the fin is smooth on one side and inde ... (cont.)

BIu

Hi, I need a replacement pair of tilt latches for a window. One says 9D on the bottom and one says 8B. The patent # is 5,139,291. Please let me know if you have these. Thank you!

GU OP05 HG04 track GU window Replacement operator arm (OP05 2020) HG04-2001”

2-3/4" long

Track is 1" wide and 1/2" deep. need lock shoes. Would you recommend this one?

I’m looking for a window pivot bracket for a sash. Do you have something like this?

This is the part that goes on the frame that the sliding glass door locks into.

I'm not sure how to go about opening the cover to access other pictures or part numbers. Several of the cranks either do not close the window or they move the window to approximately an inch or two to being closed. Hope this makes sense. Would it help for me to open a window and take a picture of wh ... (cont.)

The manufacturer is Coral and hinges are on right side when pulling door out.

seeking the part number for double hung tilt-in sash both upper and lower. Thanks.

PAPAIZ Made In Brazil & 323 on Lockset PAPAIZ 4 on both sides of ket cylinder (need key for both sides)

Hello, Do you have this golden replacement part? It’s part of a latch to a sliding screen door. Manufacturer is Libby Owen Ford Pics attached Thank you!

Old slider lock broken

I could not get the latch out if the window! But I need a replacement latch. If you cant tell what latch that is. I can try to remove it again. Thanks!

Is there a replacement for this or something i can make work? length 3 1/4 width 3/4 height 1 3/8 Wheel 1'

Need balances, Non tilt, single pane window. Looking at your pictures i'd guess s380 but I'd like to be sure. They appear to have 28B stamped on them.Thanks!

I have a sliding door and I'm pretty sure it's from 1982 when my condolences was built. The patio door is small, like apartment size, because I have a condo. How do I know which rollers I need. It jumps off and I have to lift it and adjust to get it to close without sticking. Thank you for any ... (cont.)

Is need replacements for these two things : #1 - Casement window operator - the crank/arm mechanism that opens and closes the window#2 - Casement window lock / locking handle (the handle + rod that locks the window shut)Here's the information i have on the windows : It's a casement window that opens ... (cont.)