Viewing all customer Discussions for:

Door & Window

Do you have a replacement for this?

10887 marking on top piece Bottom one which I need can't read. If staring out window it opens to the right

Please help

Thermotite back part of double hung window latch.

One of my vent stoppers broke on a pella window loooking for a replacement

Windows were installed by Rottlund Homes, development in liner grove heights mn. Townhouse. The window has hardware with a lever on the lower part of the frame and hardware without a lever on the upper part of the frame. In the frame is a slide rail with a hole in it ar each piece of hardware and t ... (cont.)

This is from a screen door roller in a tri-sliding glass door set that has built in tracks for the sliding screen doors. it's about 2.5 inches long. It's all metal including the wheel.

Replacing the old spiral balances in my windows, but got the wrong size pivot shoe. I got the S900-29 and the 15-045 pivot shoe to go with it, but the shoe is too small for the track. In the image is the old shoe to the right. I measured it at 1.5 in tall, 1.25 wide, and about 17/32 thick (i think?) ... (cont.)

I need pivot bar case Pivot bar Latch set and Coil balance for small window. Please help identify

Hello, I can't find a model # or any other number on window I would like 2 latches and 2 side to open window. All in white Thank you Tom

Finding replacement lock for sliding door. following info on the handle. Canadian patient no.919213 patiented 1973 Pat. no.3596954

I'm looking for the metal screw-in tilt latch on this window. I've uploaded a photo of the original window specs for reference.

Can you recommend a replacement crank mechanism for this window from MI window and door. It is a 9700 series, c-c35/p-c30

looking for replacement for our sliding door lock or handle.

Hello! I hope you can help me. The exterior handle of our screen door cracked into 3 pieces this afternoon. The doorwall is N Anderson Silver Line product ID 5800, 8002344228. Do you carry a replacement part?

pivot shoe looks like 15-048, but i'm not sure if you have the same pivot bar as mine

I need help with which exact operater and crank this could be because I want to replace everything completely and have all the needed parts to replace them

I see an "A" and a "2" on the operator.

Plastic part edge of sliding window broken

I'm looking for an exact match replacement for this casement hardware, see attached photos.