Viewing all customer Discussions for:

Closet

Need replacement hardware in pictures above.

I need a replacement slide roll assembly for my closet door. The door and assembly is from Contractors Warehouse. I have called them and they said I must replace the entire door. The plastic or vinyl wheel around the bearing broke off. Part number is either W8015 or RM-W8015 the best I can figure ... (cont.)

Do you know where I can purchase closet door rollers in photos? House built in 1956. Thank you. Colleen

Hi - I haven't disassembled anything yet (sliding mirrored bypass doors), but was hoping these pictures would be enough to identify what we might need. The track is in horrible shape but the rollers may still be okay. The track is 96" long so I guess we'd need two 48" pieces but I'm not sure that an ... (cont.)

Moved into a house with 4 sets of Fenstra bifold doors from the 60s or 70s. A number of the parts appear to be replaced a bit haphazardly. I believe I need part 21-019 for the bottoms, but I also need the bracket to secure them. Wanted to confirm. I've attached a photo of a top pivot pin that rece ... (cont.)

We will need one top attachment size 9' 1/2" . Also we need two bottom closet rails the sizes are 9' 1/2" and 6' 1/2''. Picture 1: Bottom railing 9' 1/2'' Picture 2: side attachment to closet door broken. Length 9' 1/2'' Picture 3: Top of attachment to closet door. Pictures 4: up close ... (cont.)

I need assistance with finding the parts in the image.

Bottom closet door guide.

Please help find the uploaded part or any part that could be compatible. I don't want to lose my mirror. Thanks

Do you have this Part available?

Hi this is an old bifold door

Need input on available replacement parts for 3 sets of closets door thickness: 1 3/8 inch thick front bypass door:1 inch wheel, offset 3/8 inch rear bypass door 1 inch wheel, offset 1 inch

Looking for replacement parts for Monarch closet mirrored doors: One bottom trac for a 70 5/8" or (72" to be cut) plus 3 rollers One bottom track for a 58 1/2" or (60" to be cut to size) plus 3 rollers. Can you advise parts numbers to order. Also would like to know your shipping to Calif zip code 9 ... (cont.)

Trying to find the correct part for the non hinge side that runs in the track. This is a picture of what I need from another door in the house. The whole mechanism is missing from the door in question. Thanks for your help

I have been looking everywhere for this "closet dual guide". It is marked with "RIVAL". It is attached to the top of my closets and rolls along a rectangular shaped conduit that runs side to side of the closet. The plastic wheels are crumbling and I am running out of options. I would appreciate ... (cont.)

would you please recommend a replacment part for a 4103 top slider for mirror bypass closet doors. it is 3.5" tall and 2 1/4" wide at the widest point. The top slider plastic parts are broken. If you recommend a wheel type part instead of a s;lider, do I need to change both doors or jsut the slid ... (cont.)

Help! This should be a pretty typical pocket door roller from the 60s - I'm sourcing for my own house, one client, then likely future clients! Any ideas on this part? I do see that several people have posted it on some kind of board here. Thank you for any help! Happy to send measurements if helpful ... (cont.)

I need to replace both the track and the rollers on my bypass mirrored closet doors. The door opening measures 70.5" total width. Can you help me identify the parts I need? Thank you.

Need to find a part

Closet door top roller