Viewing all customer Discussions for:

Drawer & Cabinet

item says LEFT. is a bracket that the roller sits in at the back of the drawer

Please see my photo, do you have this hinge?

I need to replace the small brown plastic bracket in our kitchen lower cabinet. The cabinets are no longer being made and Home Depot and Ace Hardware did not have anything similar that would allow us to use the sliding drawer/shelf. Please let us know if you have a mechanism that is similar. Or perh ... (cont.)

Broken Rail Bracket for sliding shelf. There are some letters on the rail: KV and CR. The bracket is about 2 5/8" long and 2 1/2" High. The rail itself is 1" high and fits into the bracket.

This wood part is 16 inches x 1 inch x 3/4 inch tall. It has been filed down over time by the aluminum sleeve that slides over it. Any help would be appreciated. Kathryn

Looking for these Mepla pantry drawer supports. The slide face is 3/4 x 3 inches wide and cabinet side is 1 1/2 x 3/4. The overall depth cabinet side to slide side is 1 inch. Part is marked Mepla 600 010 08 25

The plate attached to the cabinet is 2 inches. The plate attached to the door is 2.5 inches. The distance from plate to plate outside to outside is 3 inches.

What screws would you use to fasten this bracket. My bracket was not fastened with a screw; it fit into holes in the back of the cabinet.

IThey came connected so how do we install them in the drawer and in the inside of the cabinet?

One of the cabinet doors uses different hinges. Hinge B is attached to the cabinet in the photo. It has a marking that looks like "DJ3."

My drawers are the large drawers under the oven in a 20 plus year old home. Im needing 4 of these.

The plastic piece is about 43/4 inches long and the depth of the bottom is 1 inch.

I am 1n receipt of my 32-012 order #1442290 - Thank you. My immediate interest is with the Left 32-012, which is comprised of a "back-mount" piece and a "rod-holder" piece. These 2 pieces are pre-assembled as shipped to me. I only need the rod-holder piece (my existing one is broken) to mate with ... (cont.)

I need 4 of these plastic parts (2 right side and 2 left side) they are for under drawer mounts, I need the plastic part which is pictured thanks Jim

I am trying to find this part to repair a drawer

Need replacement for right side. but will order 2 of right and left foe extras.

hi im looking for the plastic insert to this part its 55130 169.2 31.15 at least thats the number on the front. i am missing the plastic that goes inside this part. can you please help

Winnebago Itasca drawer slide rear mount, several broken, cannot ID part # or manufacturer.

These are photos of removed hinges from Merillat White lazy Susan lower kitchen cabinet. Circa 1990. Would like two correct hinges for this cabinet door.

There are no numbers on the plastic sockets or on the slide. This is probably a 1980 product.