Viewing all customer Discussions for:

Drawer & Cabinet

Looking for drawer rails for a Lexington 513-306 chest. Thanks!! Tom

Hello, I need a new slide for a Woodmark drawer, as shown in the pictures. The length is 4 7/16" and the depth is 1 1/8". We did not see any this size on your web site. Can you please advise if you have this part or recommend one that will work? Thank you, Tanya

We have a 1967 model home with kitchen cabinets with these hinges.

Hello, I have a 20 inch drawer slider, that the roller has broken off the part of the slider attached to the cabinet frame. I tried to replace the whole slider, but the drawer portion of the slider is incorporated with the sides of the drawer, so can't be replaced, and did not match the new slider. ... (cont.)

Do you have this part for A kitchen shelf? Thanks in advance!

Lower hinge broke

Male drawer guide that fits 32-053

us patent 5604966 left side 860 02 right side 05-03 base mount plate us pat 6647591 01 w51-04

I need four of these. I have one that is usable.

I had a pull out drawer socket break, this was at the rear of the cabinet. It's a plug type and not screwed into the cabinet so there are two big holes there now. The cabinets are Merillat and I know they don't have these anymore, and was hoping you had a replacement part that would cover the exist ... (cont.)

can you pls tell me if I need another part on this drawer rail? the drawer seems to 'drag' on the wood, when I pull it out.thank youJanice

These are for a Bassett, Cherry dresser. I bought about 15 years ago. I need the white piece to fit on the wooden rail in the bottom of the drawer. Attached are two pictures. Please let me know if this is the right one. Thank you.

Need hinge for cabinet door 1/2" overlay

Assumed to be original 1952 custom cabinets, looking for replacements that would work.

95mm long Back plate 50× 30 mm Rail interior 23 mm

Need replacement hanger for attaching the slider for the drawer. I am attaching two pictures for your reference. Left one is in tact. Right support is broken and need a similar replacement as the left. Please let me know if you have any questions. Thanks, Bini

Looking for a pair of these hinges that are for a corner cabinet door that is actually two doors in one that are attached with a long rod type of hinge. But I need the one in the pic that are screwed to the frame. It said Blum on them. Thx

Need plastic holder snaps in metal bracket back wall 3 pair

These are from cabinets that are 40 years old. Only information on the hinge is 5174 S1. Can I get these? Need 21 pairs. They are spring closing. Single Demountable Cabinet Hinge | 1/4 inch (6 mm) Overlay Hinge.

A bottom drawer glide plate made of metal is missing at the back of one large dresser drawer. The top and bottom "rails" of the slide itself are made of wood. Can you help me identify and locate this item? Thank you!