Viewing all customer Discussions for:

Lavatory

I would like to know the length of the lip on the 1/4" frameless shower door seal and if it is very flexible. I am in need of a lip of 1/2" for my double sliding door corner shower. Thank you, Mary Ann

Original is so soiled & corroded . . . Is it worth cleaning/sanitizing ? Considered removing & running through dishwasher. Also need gray vinyl/rubber sweep approx 28? longShower door is 27 1/2" wide. Drip rail is 26 1/2? long with 3 screws that are 10" apart. I would like to ... (cont.)

The metal drip plate attaches with 4 screws and measures 27 and 5/8 inches end to end, but 26 5/8 to the notch that was cut out by the installers. The metal part is fine. However, the rubber sweep is rotted. that is really the only piece I need. It is 25 inches long and the channel or groove it ... (cont.)

The bottom piece, roller guide, 10-062,'10-063 broke and I was able to replace it with the two pieces I bought. But now the upper fixture on top is a little worn and doesn't allow the bottom piece to snug up enough to catch. I want to replace both pieces that glide along the top. Thanks ... (cont.)

Hello, One of the rollers to my Maax shower enclosure has broken. The metal bracket has snapped. Doors are curved glass, roller held in place with one bolt that passes through single hole in glass. Two of these roller units are used for each sliding piece of glass. I spoke to a Maax rep ... (cont.)

Shower door wheel with hardware..it is screwed in with 2 screws on the top of the shower door and it hangs in the track.

This part is the bottom shower door guide pictured as front and back. The back is pictured with the vanity cover removed. Do you have anything like this? Charles

It will not let me upload the photos. If you email me I will respond with a couple of pics of the drip rail I am looking for. thank you, Jason

Looking for a replacement part for bottom guides on a curved sliding shower door Thanks

Your part #10-071 top rail, bottom rail could not find part # I'm looking for replacement parts for my bathroom door to my 2009 Dutchmen Express by Thor\ Four Winds.

I just replaced the top one from a part from your factory with the number 10-058. I received two rollers (one for the top and one for the bottom) but the bottom one on my shower door does not have rollers but "hooks" like the picture I sent you, although the hook is broken off.

Can you help me identify these items? They are spring loaded hooks from the bottom of the sliding shower door.

Hello, I need replacement parts for my shower door. This shower door has two glass panels that slide to the left and right in a half circle shape. Each door has two rollers on top and two white pieces on the bottom ( see pic) On one of the doors, one of the top roller and two of the bottom pieces ( ... (cont.)

Good evening. I was attempting to fix this framed shower door but the bottom metal piece is missing. Not only does this keep me from reattaching the rubber piece but make the door difficult to open. It appears the missing piece makes the door sit too low causing it to strike the bottom frame. Also ... (cont.)

Even though hack saw will give me the required length. The screw hole distance must be 14 inches. Can you please confirm the distance between the holes? Thanks

Looking for the correct replacement part.

Shower door roller Out of a 2013 Winnebago raven trlr

I have one of your shower doors, and they vinyl sweep is no longer good. I'm trying very hard to replace it, but I can't seem to find one shaped like the one I'm replacing. Any help would be greatly appreciated! David

Need this part for a handicapped stall

Hi I 1ea chrome and 1ea bronze both 24?. They look like your 10-324