Viewing all customer Discussions for:

Lavatory

What is the height of the 10-325

I am looking to replace the seal at the bottom of my frameless shower door and also the seal on the side. The first three photos are of the bottom seal piece which is approximately 26.5" long. The glass appears to be a standard thickness. The second three photos are of the side sealing which as ... (cont.)

My handles look the same on the shower door. The one side broke and I was wonder since I have a brass finish do you make this in a different color so it will match?

Hi I took apart the bottom of the shower to clean it and forgot to pay attention to where the grey piece goes when reattaching. Any chance you might know? I also would love a replacement part for the metal piece. The shower handle says Work Right but I don

I like this design, but need a longer sweep, please. This appears to have only 23/32" below the bottom of the shower door. Is there a model with 1" of actual sweep? thanks.

I need to replace the seals on the bottom of the glass shower door. I can't find any markings on the door or the seals. I need the part that goes around the door and the part on the bottom of the granite. Thank you for your help!

The space between the bottom door frame and the shower frame is about 7/16"; when I mount your 10-325 how far below the shower frame should the sweep (10-327) be located? Want to make sure before I start drilling mounting holes. Thanks for your help! Mike

It goes on the frame where magnets are located on

My sweep does not have screws in it so it appears it was glued or welded on. Do you have some ideas on how I can remove it without hurting the shower door? Thank you!

I moved into a condo and there

I have a shower door on a hinge with no frame, all glass. There is an existing spring loaded latch shown in the attached picture but no pull/handle. There hasn't been a handle since I bought the house so I don't know what it looked like. I am wondering if you have the appropriate handle that is co ... (cont.)

My shower door drip rail that I want to replace does not screw into the door. Does the drip rail come with screws? If not what kind/size do you recommend?

Which one can I use with All American Metal Door system. Thank you. Lucio

Our shower door is 1/2" thick and we need to replace the sweep and seal. The largest I see on your site is 5/16". Do your offer a 1/2" version. Thanks, Mike R

I took it off the door cause it fell apart is there only 3 pieces? How do I put it back togethet?

Do you carry these parts? Thank you!

The photo attached is a cracked bracket and roller for an old sttyle framed shower door . The bracket has since failed (broke along the cracked surface) so the door doesn't roll. Do you have (or know where I can get ) a replacement for this roller/bracket assembly? Thanks much.

how does it get attached to shower door. I see there is a space in the middle. what is needed? need 36 inch chrome sweep with drip rail. does rail. come with the sweeper

I need 2 sets of roller hardware top and bottom.

Will this part 10-153 work on the delta frameless shower door system?