Viewing all customer Discussions for:

Lavatory

I have a 1989 door and the rubber strip is falling apart. I can't find the strip so I assume I need to replace the whole sweep. I can't find anything like I have that wraps around the door. What do you suggest?

I have attached a picture. I was about to just order the reversible roller but then wondered if it was a different part I needed - the roller is fine - its the piece that attaches to the door that has broken - is that just some sort of bracket or fastener? Do you sell it separately? ... (cont.)

I have a rounded corner shower how do I remove the bottom Guide clips from the door

I need to know the maximum width of glass door that the guide will allow to slide through

Hi This is my shower door, 24 inches. Do you think if I buy the part you have, it will be matched? Has 2 screws. Thx

The shower door wheel kit 10-058 is attached to the door with one bolt. The wheel & bumper assembly currently installed are attached to the door by two bolts thru the wheel assembly

Hi - I need to replace a shower door sweep that slides into the bottom of a hinged shower door. It is a T top - the top of the T measures 1/4 inch across. It is 36 inched wide and 1 inch deep. Can you please help? Thanks

Can you tell me the diameter of the bulb top of the sweep.

My 23 1/2 inch chrome shower door sweep needs replacing. The vinyl strip is loose. In your photo of sweep 10-325 and 326 the vinyl strip looks dark brown. Is that the case or do you have gray or clear also?

Good morning I am looking for some help in locating a replacement bottom track for an existing shower door. I do not know the make of it. Do you have this item or know where it can be located? Thank you

this rail measures 24 1/4" and has a notch on the end. Will the 24" shower with drip rail be the correct replacement?

Please refer to pictures attached. The most critical measure is the distance between the bolt center that goes through the glass and the inner bottom (if you invert the picture) of the "U" shape that hugs the top of the glass door - that is a bit more than 3/4" (13/16" to 7/8"); I guess this distanc ... (cont.)

I have a recessed medicine cabinet with 3 separate mirror doors. The left and middle doors open from the left to right. The right door opens from the right to left. Do I buy three knobs to place one on each cabinet so they open in the intended direction? Or do I buy an extra knob (4, one being a ... (cont.)

#Could you please give me the inner dimensions of the drip rail, touching the shower door of #10-326. From your diagram, it kind of looks like an "L". I especially need the height of the part pouching the door.

I need to replace my shower door glides and it looks like I will need P/N 10-216. Can you tell by the pictures I provided if these will work for me? Do I have to remove the screw to replace the glide? Will I need to remove the door from the track to replace the glides? What is the price for each ... (cont.)

When securing the 10-324 shower sweep with rail to a metal shower door frame with the 33-071 screws, what drill bit and size should I use?

10-058 Need to replace one set of he wheels on top of the neo round glass shower door. Also all 4 bottom clips with springs broke.

I bought your part for the shower door roller assembly - part 10-071... Great for the front part of the doors, but the back part of the door has a similar part that is angled, not straight (see attempted photo attached) ... Do you have those parts as well?

I am looking for the wheels and attachment piece for a curved shower door. The shower has this information on it

I want to buy your shower door rollers for a curved shower. How do you remove the top curved bat to insert the rollers into it. Your product code for the roller assembly is 10-071