Viewing all customer Discussions for:

Lavatory

Hi, My shower door bottom plastic rail broken need to replace. Could you let me know if your company sell this part or what kind produce and replace it. Thanks,

Our house is KHOV home. I need to replace shower door roller. Any help will be great.

Do I have to dismantle the sliding door or can I take the top frame off the sliding door?

Shower door roller

this part is worn to a point where the sliding doors the inner sliding door goes into the bathtub area creating a dangerous situations this plastic parts is secured by 2 screws and holds the door onto the bottom part of the door frame.!!!

Could you advise me of this part that I need? It is a shower roller with a groove of slot. Thanks, Dolf

Hi, I have a hanger like this: Frameless-Shower-Hanger/pd/Lavatory-Replacement-Hardware/10-153 what would be the right screw and nut set for it? Pls advise. Thank you!

I have a drip rail that is missing on my shower door in the house I just moved in to. It is 25" long, has two screws, and the door swings out. Would Product Code: 10-324 work for me, or do I need to go a different direction?

Do you need to drill a hole in the aluminum so the pin could go in through the aluminum? Does the pin go through the aluminum? To be clear does the pin go through the plastic on one side then through the aluminum then through the plastic square on the other side? Thanks for any help you can give me. ... (cont.)

Step 1: Remove the old shower-door guide. I can't. Detaching it from the DOOR was duck soup. Getting it out of the groove appears to be impossible. It would APPEAR that the originals were slid onto the bottom track with the end(s) of the track free. Now, of course, the track is sealed to the tu ... (cont.)

Greetings, looking to replace the sweep from the attached photos. The piece is approx 21.5" long. It looks like it was attached with double sided tape and the screws held the drip trim piece in place. Thanks, Bret

I'm trying to find a 3/8" height glazing for a 1/8" glass. I have a sliding/bypass shower door and has been so difficult to find the right size glazing.Hopefully you will have the size I'm looking for. thanks in advance

what is the distance between the drilled holes (center to center) on the part 10-325. mine is 22 3/4"

What screw P/N is used on P/N 10-138 handle? I would like to replace my current screws as well.

I am looking for a replacement for this broken glass shower door sweep. It is approximately 23.5" long, with two screw holes, approximately 17.5" apart. Do you have anything that matches this configuration?

I am looking for some roller wheel assemblies for a CURVED shower door. I have a shower unit that's 8 years old, brand unknown. It is a corner unit with TWO sliding front doors. The opening is in the middle of the unit, meaning the doors open away from each other, and close together. They hang b ... (cont.)

Shower is an AKER by MAAX. They say that Keystone made doors for their showers 5 or 6 years ago. Keystone is now no longer in business. We need the gasket which seals the swinging door. Glass is 3/16".

We have 3 Pella storm doors with the bottom weather stripping that is torn. I cannot identify the style or number of the doors. The doors are about 12 years old. When examining the weather stripping it has one strip closer to the outside and a second strip closer to the inside of the door. ... (cont.)

Hello, I'm interested in purchasing a shower sweep (product code 10-321). Info on your website states this product is 1 inch in height. Do you have this product with 1/2 inch in height? Or something smaller than 1 inch? It needs to have the T-square dimension at 3/16 at the top. Thank you! ... (cont.)

I have a customer who has these clips on the bottom of her doors however there is no guide that I can see to hold the doors in,from swinging freely out, on the bottom. What part am I missing? What kind of bottom guide should I use? Vic