Viewing all customer Discussions for:

Other

Hello, Not quiet sure what this part is called but would you happen to have it in stock? Seems to hold the glass in place, was a pain in the neck to take out and broke one in the process

I need the plastic operator shoe for this hinge

Spiral balance series: S900Spiral length: 45Tip-color: redQuantity: 6What I really need is a 45" 3/8" super strong spiral balance -- I've seen them described as yellow tipped on other sites. My windows are very heavy and have worn out the existing balances. I didn't see a yellow tipped product of th ... (cont.)

Hi, Last year I purchased some replacement coil balance shoes, specifically your Product Code: 15-180 (https://www.swisco.com/Coil-Balance-Pivot-Shoe/pd/Tilt-Window-Replacement-Pivot-Lock-Shoes/15-180) which fit perfectly in my window. I had a few windows to fix, and so I cobbled together the spr ... (cont.)

I am looking to replace a Window Channel Slide. It is 13" long and has stamped numbers 12 3 BSL NL and need help identifying the part I need. Attached are the photos. Thanks for your time William

Hello....this window crank has Truth stamped on it, with the numbers 05302002 0030. There is also a B on the arm. It seems to be stripped out. I've no idea how old it is, but am hopeful there is a model that will work in it's place. Thanks, Joe

Do you know what part would be similar to this craft line arm and crank? I am also replacing the 14 in hinge bars, thank you

I need to replace some handles on a 2 dressers. Attached are pictures. The handles have a whitewash over darker color.

Looking for an emco forever door part 38434.(door latch).

Could the following SWISCO part be used instead? Sliding Window Roller, 1/2" Flat Edge Wheel Product Code: 87-224

This is an old storm window. Glass was removed but the brittle corner "pins" used to hold the frame pieces together have broken. Can you tell me what type of corner pieces these are and whether you carry them?

I need to replace the roller for what I suspect to be a 1973 era sliding door. Previously, I purchased a couple rollers, however, they were not correct as the location of the height adjustment screw and the frame attachment were incorrect. As a last resort, replacing just the wheel will suffice. ... (cont.)

Can you suggest a replacement for my broken screen clips? The broken one is at the right in the photo.

I cant seem to figure out which assembly this is. Wheel is 1.5" diameter

Missing whatever is supposed to go on the end of the spiral which connects to window. Not sure if I need a specific type.

Here's the info on the door sticker: Balcony Sliding Door ANSI/AAMA 101-85 MFGR CODE HI-1 SERIES: 25/MARK I SGD-C30 MST: 20080(OXXO) I've included pics of the one good handle and the one that's broken and missing the wooden piece. I've also included the label.

The window is 34 inches wide and 31.25 inches tall. i need to replace just the sliding portion if possible.. manufacturer is iwc

Hi, I need to replace a couple of these window balance coils on windows which I am not sure of the original manufacture. Only marking on them has 15 but I don't think the window weights around 30lbs, plus this is a single coil. Also, only the metal shoe is broken at the bottom of these, can only tho ... (cont.)

I have two 47" x 47" windows with a 23" spiral balances & two 35" x 59" windows with 28" spiral balances (all the lower windows tilt). Should I get the pivot shoes as well? Not sure what the size and part would be if needed? Does it matter that my spiral balances are encased in a plastic housing not ... (cont.)

Hello,I have a couple of Milgard windows and I am unsure as to which channel balancers to buy. I have included pics of the balancers, but did not take any of them installed yet. Not sure if you can help based on these pictures. I also have a stamp of 2330 which I assume is the weight limit of the ... (cont.)